Products
-
Simpson H8SS Hurricane Tie, 18 Gauge, Stainless Steel
Made in the USA Features several configurations for wind and seismic resistant ties for trusses and rafters Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners Approved for installation with SD Connector Screws
$13.05
-
Simpson HUC Double 2 x 10 Concealed Flange Joist Hanger - Stainless Steel
Ideal for sight exposed connections and end of ledger/rim joist installations Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners Under certain conditions, alternative size nails or Simpson SD screws may be substituted. Note that it may significantly alter load capacity. See the nail substitution chart. Caution! - Do not bend or remove tabs or alter hanger in any way
$75.50
-
Simpson HUC Double 2 x 8 Concealed Flange Joist Hanger - Stainless Steel
Ideal for sight exposed connections and end of ledger/rim joist installations Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners Under certain conditions, alternative size nails or Simpson SD screws may be substituted. Note that it may significantly alter load capacity. See the nail substitution chart. Caution! - Do not bend or remove tabs or alter hanger in any way
$68.50
-
Simpson LCE4SS Light Post Cap - Stainless Steel
For end cap connection, providing connection between the end of beam and a post. Provides maximum versatility. May be used for various size member(beam) and end post size connections Requires 2 pieces per cap. Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners
$30.95
-
Simpson LS50SS Skewable L Angle - Stainless Steel
Made in the USA Reinforcing and adjustable angle Site bendable (one time) from 0° - 130° to fit your application. Used for joist framing where a standard hanger isn’t practical. Bending more than once will cause metal fatigue and severely reduced load capacity.
$25.65
-
Simpson LSCSS Adjustable Stair Stringer Connector, 18 Gauge, Stainless Steel
Made in the USA Makes stair-stringer connections fast and easy Type 316 Stainless Steel for the ultimate in corrosion resistance Provides a concealed connection between the stair stringer and the carrying header or rim joist Replaces costly framing & toe-nailing Use for both left and right applications Install with specified stainless steel fasteners
$36.85
-
Simpson LTS12SS, 20" Light Twist Strap, 18 Gauge, Stainless Steel
Made in the USA Twist straps provide tension connections between two wood members Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners
$12.40
-
Simpson LTS18SS, 18" Light Twist Strap, 18 Gauge, Stainless Steel
Made in the USA Twist straps provide tension connections between two wood members Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners
$19.00
-
Simpson LUC Single 2 x 10 Concealed Flange Joist Hanger - Stainless Steel
Ideal for sight exposed connections and end of ledger/rim joist installations Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners Under certain conditions, alternative size nails or Simpson SD screws may be substituted. Note that it may significantly alter load capacity. See the nail substitution chart. Caution! - Do not bend or remove tabs or alter hanger in any way
$37.50
-
Simpson LUC Single 2 x 6 Concealed Flange Joist Hanger - Stainless Steel
Ideal for sight exposed connections and end of ledger/rim joist installations Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners Under certain conditions, alternative size nails or Simpson SD screws may be substituted. Note that it may significantly alter load capacity. See the nail substitution chart. Caution! - Do not bend or remove tabs or alter hanger in any way
$34.15
-
Simpson LUS Double 2 x 10 Face Mount Joist Hanger - Stainless Steel
Made in the USA with Type 316 (low Carbon) Stainless Steel 316 stainless provides the highest salt water corrosion resistance of the 316 types. Appropriate for marine and seaside applications and in other severe conditions where corrosion is a concern Must be installed with specified stainless steel fasteners Patented double shear nailing distributes the load through 2 points on each joist for greater strength. The nails slant through the joist into the header, not only fastening the hanger but also helping to carry some of the load. The hanger design allows for the use of fewer fasteners for faster installation Install with specified stainless steel fasteners Full length 3” or 3-1/2” hand drive nails (or 2-1/2” collated connector nails) are always required for the patented double sheer (angled) nailing. Under some conditions alternative sized fasteners may be substituted but at a potentially significant load reduction. See nail substitution chart. LUS series hangers are not intended for welded applications Caution! - Do not bend or remove tabs or alter hanger in any way
$24.30
-
Simpson LUS Double 2 x 6 Face Mount Joist Hanger - Stainless Steel
Made in the USA with Type 316 (low Carbon) Stainless Steel 316 stainless provides the highest salt water corrosion resistance of the 316 types. Appropriate for marine and seaside applications and in other severe conditions where corrosion is a concern Must be installed with specified stainless steel fasteners Patented double shear nailing distributes the load through 2 points on each joist for greater strength. The nails slant through the joist into the header, not only fastening the hanger but also helping to carry some of the load. The hanger design allows for the use of fewer fasteners for faster installation Install with specified stainless steel fasteners Full length 3” or 3-1/2” hand drive nails (or 2-1/2” collated connector nails) are always required for the patented double sheer (angled) nailing. Under some conditions alternative sized fasteners may be substituted but at a potentially significant load reduction. See nail substitution chart. LUS series hangers are not intended for welded applications Caution! - Do not bend or remove tabs or alter hanger in any way
$17.40
-
Simpson LUS Double 2 x 8 Face Mount Joist Hanger - Stainless Steel
Made in the USA with Type 316 (low Carbon) Stainless Steel 316 stainless provides the highest salt water corrosion resistance of the 316 types. Appropriate for marine and seaside applications and in other severe conditions where corrosion is a concern Must be installed with specified stainless steel fasteners Patented double shear nailing distributes the load through 2 points on each joist for greater strength. The nails slant through the joist into the header, not only fastening the hanger but also helping to carry some of the load. The hanger design allows for the use of fewer fasteners for faster installation Install with specified stainless steel fasteners Full length 3” or 3-1/2” hand drive nails (or 2-1/2” collated connector nails) are always required for the patented double sheer (angled) nailing. Under some conditions alternative sized fasteners may be substituted but at a potentially significant load reduction. See nail substitution chart. LUS series hangers are not intended for welded applications Caution! - Do not bend or remove tabs or alter hanger in any way
$20.55
-
Simpson LUS Single 2 x 10 Face Mount Joist Hanger - Stainless Steel
Made in the USA with Type 316 (low Carbon) Stainless Steel 316 stainless provides the highest salt water corrosion resistance of the 316 types. Appropriate for marine and seaside applications and in other severe conditions where corrosion is a concern Must be installed with specified stainless steel fasteners Patented double shear nailing distributes the load through 2 points on each joist for greater strength. The nails slant through the joist into the header, not only fastening the hanger but also helping to carry some of the load. The hanger design allows for the use of fewer fasteners for faster installation Install with specified stainless steel fasteners Full length 3” or 3-1/2” hand drive nails (or 2-1/2” collated connector nails) are always required for the patented double sheer (angled) nailing. Under some conditions alternative sized fasteners may be substituted but at a potentially significant load reduction. See nail substitution chart. LUS series hangers are not intended for welded applications Caution! - Do not bend or remove tabs or alter hanger in any way
$19.25
-
Simpson LUS Single 2 x 6 Face Mount Joist Hanger - Stainless Steel
Made in the USA with Type 316 (low Carbon) Stainless Steel 316 stainless provides the highest salt water corrosion resistance of the 316 types. Appropriate for marine and seaside applications and in other severe conditions where corrosion is a concern Must be installed with specified stainless steel fasteners Patented double shear nailing distributes the load through 2 points on each joist for greater strength. The nails slant through the joist into the header, not only fastening the hanger but also helping to carry some of the load. The hanger design allows for the use of fewer fasteners for faster installation Install with specified stainless steel fasteners Full length 3” or 3-1/2” hand drive nails (or 2-1/2” collated connector nails) are always required for the patented double sheer (angled) nailing. Under some conditions alternative sized fasteners may be substituted but at a potentially significant load reduction. See nail substitution chart. LUS series hangers are not intended for welded applications Caution! - Do not bend or remove tabs or alter hanger in any way
$12.15
-
Simpson LUS Single 2 x 8 Face Mount Joist Hanger - Stainless Steel
Made in the USA with Type 316 (low Carbon) Stainless Steel 316 stainless provides the highest salt water corrosion resistance of the 316 types. Appropriate for marine and seaside applications and in other severe conditions where corrosion is a concern Must be installed with specified stainless steel fasteners Patented double shear nailing distributes the load through 2 points on each joist for greater strength. The nails slant through the joist into the header, not only fastening the hanger but also helping to carry some of the load. The hanger design allows for the use of fewer fasteners for faster installation Install with specified stainless steel fasteners Full length 3” or 3-1/2” hand drive nails (or 2-1/2” collated connector nails) are always required for the patented double sheer (angled) nailing. Under some conditions alternative sized fasteners may be substituted but at a potentially significant load reduction. See nail substitution chart. LUS series hangers are not intended for welded applications Caution! - Do not bend or remove tabs or alter hanger in any way
$15.37
-
Simpson MSTA12SS Medium Strap Tie, 18 Gauge, Stainless Steel
Made in the USA Straight straps are used to transfer tension loads in a wide variety of applications Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners
$10.80
-
Simpson MSTA18SS Medium Strap Tie, 18 Gauge, Stainless Steel
Made in the USA Straight straps are used to transfer tension loads in a wide variety of applications Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners
$14.80
-
Simpson MSTA24SS Medium Strap Tie, 18 Gauge, Stainless Steel
Made in the USA Straight straps are used to transfer tension loads in a wide variety of applications Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners
$23.20
-
Simpson MSTA36SS Medium Strap Tie, 18 Gauge, Stainless Steel
Made in the USA Straight straps are used to transfer tension loads in a wide variety of applications Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners
$49.50
-
Simpson MTS12SS, 12" Medium Twist Strap, 16 Gauge, Stainless Steel
Made in the USA Twist straps provide tension connections between two wood members Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners
$11.90
-
Simpson MTS20SS, 20" Medium Twist Strap, 16 Gauge, Stainless Steel
Made in the USA Twist straps provide tension connections between two wood members Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners
$26.70
-
Simpson Strong Drive SDS Heavy-Duty Connector Screw, 25pcs, Stainless Steel
Type 316 Stainless Steel for ultimate corrosion resistance 1/4” diameter high-strength structural wood screw 3/8” hex head with 0.48” integrated washer Type-17 point enables easy driving with no pre-drilling and minimal wood splitting Used to fasten certain heavy duty framing connectors to wood members Excellent for fastening ledger boards 25pc box
$32.30 - $53.20
-
Simpson Strong-Bolt 2, Wedge Anchor, Stainless Steel
Type 316 Stainless Steel for ultimate corrosion resistance Code listed for cracked concrete and uncracked concrete See code listings Head stamped with length identification number Chamfered top to prevent mushrooming during installation Optimal choice for performance under seismic and high-wind conditions Qualified for a minimum 3-1/4” concrete thickness Tested per ACI355.2 and AC193 specifications concrete design information available in spec section below
$8.00 - $15.45
-
Simpson SUL Single 2 x 10 Skewed Left 45° Joist Hanger - Stainless Steel
The SU series of hangers are skewed 45° left or right. Angled nail slots direct nails for proper placement. These hangers will normally accommodate a 40° - 50° skew. The letter "L" in the code designates left skew. The letter "R" designates right skew. Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance Features several configurations for wind and seismic resistance ties for trusses and rafters. Install with specified stainless steel fasteners
$48.00
-
Simpson SUL Single 2 x 4 Skewed Left 45° Joist Hanger - Stainless Steel
The SU series of hangers are skewed 45° left or right. Angled nail slots direct nails for proper placement. These hangers will normally accommodate a 40° - 50° skew. The letter "L" in the code designates left skew. The letter "R" designates right skew. Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance Features several configurations for wind and seismic resistance ties for trusses and rafters. Install with specified stainless steel fasteners
$38.85
-
Simpson SUL Single 2 x 6 Skewed Left 45° Joist Hanger - Stainless Steel
The SU series of hangers are skewed 45° left or right. Angled nail slots direct nails for proper placement. These hangers will normally accommodate a 40° - 50° skew. The letter "L" in the code designates left skew. The letter "R" designates right skew. Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance Features several configurations for wind and seismic resistance ties for trusses and rafters. Install with specified stainless steel fasteners
$46.15
-
Simpson SUR Single 2 x 10 Skewed Right 45° Joist Hanger - Stainless Steel
The SU series of hangers are skewed 45° left or right. Angled nail slots direct nails for proper placement. These hangers will normally accommodate a 40° - 50° skew. The letter "L" in the code designates left skew. The letter "R" designates right skew. Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance Features several configurations for wind and seismic resistance ties for trusses and rafters. Install with specified stainless steel fasteners
$48.00
-
Simpson SUR Single 2 x 4 Skewed Right 45° Joist Hanger - Stainless Steel
The SU series of hangers are skewed 45° left or right. Angled nail slots direct nails for proper placement. These hangers will normally accommodate a 40° - 50° skew. The letter "L" in the code designates left skew. The letter "R" designates right skew. Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance Features several configurations for wind and seismic resistance ties for trusses and rafters. Install with specified stainless steel fasteners
$38.85
-
Simpson SUR Single 2 x 6 Skewed Right 45° Joist Hanger - Stainless Steel
The SU series of hangers are skewed 45° left or right. Angled nail slots direct nails for proper placement. These hangers will normally accommodate a 40° - 50° skew. The letter "L" in the code designates left skew. The letter "R" designates right skew. Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance Features several configurations for wind and seismic resistance ties for trusses and rafters. Install with specified stainless steel fasteners
$46.15
-
Simpson TA10SS Staircase Angle, 10", 12 Gauge, Stainless Steel
Made in the USA For use in structurally sound staircase framing Ties the stair tread to the stringer Install one TA angle at each end of stair tread The Simpson Strong-Tie® TA eliminates costly conventional notching Attached to tread & stringer with ¼” x 1-1/2” Stainless Simpson SDS screws Install with specified stainless steel fasteners Code compliant
$54.15
-
Simpson TA9SS Staircase Angle, 9", 12 Gauge, Stainless Steel
Made in the USA For use in structurally sound staircase framing Ties the stair tread to the stringer Install one TA angle at each end of stair tread The Simpson Strong-Tie® TA eliminates costly conventional notching Attached to tread & stringer with ¼” x 1-1/2” Stainless Simpson SDS screws Code compliant
$49.78
-
Smart-Bit Depth Setter for Decking & Drywall
SMART-BIT® Deck Screw Depth Setter is designed to make fastening decks easier & faster with clean and uniform results - Perfectly Set Screws...Every Time. Auto-Stop Once target depth is reached, the Auto-Stop™ mechanism inside the tool disengages the driver bit and stops the screw from driving without further stripping the screw recess Locking Ring Secures the depth of the tool for consistent screw depth every time Adjustment Ring Depth can be adjusted for many different types and sizes of screws & applications Works well with Cap-Tor XD screws for composite decks Not for use with an impact driver See additional information below for instructions for use This amazing tool will set your screws to the same adjustable depth each and every time. Once target depth is reached, the Auto-Stop mechanism inside the tool disengages the driver bit and stops the screw from driving further - without stripping the screw recess or damaging the deck surface. Note from the manufacturer, Starborn Industries:Instructions for UseGeneral UseLoosen Locking Ring (2) and set fastener depth by moving the Adjustment Ring (3) to the desired position. The adjustment ring must engage at least two full threads of the tool body. Secure the Adjustment Ring with the Locking Ring (2). To determine the desired screw depth, practice on scrap material.Drill in a straight and stable fashion with a standard drill*. The screw is set when the Auto-Stop™ mechanism engages fully. In most decking materials, the tool makes a clear popping sound when the Auto-Stop™ engages.Replacing Driver BitDisconnect power and retract tool fully; remove bit with pliers. To insert new bit, retract tool fully and insert bit all the way into tool.*Note: Impact drivers may not set screws to the correct depth and may cause the locking ring to come loose. Standard drills are recommended for use with the Smart-Bit Depth Setter.Works with Torx® and Phillips® BitsEach tool includes one T-20 bit in the tool and four additional replacement bits ( (2) T-20 bits, (1) T-25 and (1) #2 Phillips bit
$27.65
-
Smart-Bit Predrilling & Countersinking Tool
With Replaceable Powerbolic™ Drill Bits. Available in 5 sizes. Save with the Combo Kit. Pre-drill and countersink in one fast step with the new Smart- Bit® Smart-Bit® removes the guesswork from pre-drilling and countersinking Smart-Bit Quickly drills the perfectly countersunk hole in deck boards Drills a 1-1/8" deep hole (including countersink)sufficient for decking up to 5/4" nominal thickness Excellent for use in hardwoods and composite lumber, eliminating "mushrooming" around the screw head in composites
$24.45 - $69.99
-
Smart-Bit Replacement Bit Packs
Replacement bit pack for the Pro Plug Tool for Wood. Includes 5 replacement drill bits Creates a 1-1/2" (38mm) hole To be used with the Pro Plug System for Wood
$19.75
-
Smart-Bit Structural Depth Setting Collar
The Smart-Bit Structural Depth Setting Collar for use with Smart-Bit Structural Forstner Bits. This tool is customizable. The collar is universal and fits 3 different sizes of Forstner bits. The Smart-Bit Structural Tool is designed for pre-dilling and countersinking structural screws in wood and structural composite lumber. Used for screw installations in framing lumber, pergolas, exposed beams, decks and more. The collar serves to protect the wood and prevent marring Compatible bits: 18mm Forstner Bit for the Starborn Structural F19 & Structural F23 stainless steel screws 20mm Forstner Bit for the Starborn Structural F23 screw (epoxy version) 22mm Forstner Bit for the Starborn Pro Plug System for Structural Composites and Wood Use Instructions: Align the Depth Setting Collar with the groove on the corresponding Forstner bit and tighten the set screw until the assembly is secure. Predill into the wood/composite material until the collar stops spinning. Remove any debris from the tool. Drive the screw until it is fully installed, being sure to not overdrive
$56.60
-
Smart-Bit Tool for Fiber Cement
SMART-BIT® Fiber Cement Tool is designed to make pre-drilling and countersinking fiber cement easier & faster with clean and uniform results -Pre-drills and Countersinks in One Easy Step! Use with #10 flat head screws Free-Spinning Stop Collar The Smart-Bit stop collar spins free of the drill bit, preventing surface damage or marking. When the stop collar stops spinning, the hole is complete. NOTE! Do not use with a hammer drill. No-Mark Rubber Ring Even though the stop collar is free-spinning, Smart-Bit also adds a rubber O-ring to make sure it stops properly and without leaving any marks behind. Tungston Carbide Bits & Countersink The Tungston carbide tipped countersink and bits minimize wear and help maximize the life of the tool.Anti-Clog Debris CavityThe Smart-Bit debris cavity gathers waste material, keeping it clear of the countersink, unlike conventional flush mounted countersinks
$63.75
-
Split Lock Washer, Stainless Steel
Type 18-8 and 316 Stainless Steel Sold by the pieceBuy 100 pieces or more and save!
$0.04 - $1.26
-
Square Recess Driver Bits
1" Insert Bits - A compact bit for use in wire detent chucks and drywall style guns 2" Power Bits - A ball detent style bit for use in standard and "quick release" chucks Also available in 3 packs - Save 25% over single bit price!!
$1.00
-
Star Recess Driver Bits
U2 U-Bits™ Star Drive Bits Made to fit perfectly into U2 screws- snug fit allows for one-handed installation! Will fit any star drive screw U2 U-Bits are Color coded Sold in packages of 2 Perfect for use with an impact driver
$5.65 - $6.90
-
Star Recess Driver Bits
1" Insert Bits - A compact bit for use in wire detent chucks and drywall style guns 2" Power Bits - A ball detent style bit for use in standard and "quick release" chucks Buy 3 and Save 25% over single bit price!!
$1.50 - $2.95
-
Star T-50 Driver Bit
T-50 star drive bit1-1/4" lengthSold per piece10 bits per ctn
$4.88
-
Starter Kit for the Pro Plug System
Includes: (1) Pro Plug Tool for Wood (1) Pack of 5 replacement bits (1) bottle of wood glue (brand may vary) (2) pieces of 5" orbital sand paper - 60 grit (3) T20 star drive bits
$64.95
-
Strong-Drive SDS Heavy-Duty Connector Screw, 1/4" x 6", 100pcs
3/8" Hex Head 1/4" x 6" SDS Screws 100pcs Exterior Grade Code Listed Screw & Coating No Pre-Drilling required Installs with a low-speed 1/2" drill
$119.99 $99.97
-
Structural F19 Multipurpose Screw, 2-7/8", 20pcs
Open Box Sale. Product packaging has been opened. Structural screw comparable to a 3/8" lag 2-7/8" Screw, T30 star drive IRC/IBC code compliant Low Profile Flat Head Speed Knurl threading reduces driving torque Tri-Forge Point for fast starts and reduced splitting Approved for ACQ lumber
$18.85 $15.85
-
Structural F23 Stainless Deck Ledger/ Multipurpose Screw, Black, 20pcs, 4"
Incorrect packaging sale. 4" black screw in 5" box. 4" Structural Screw with Black colored Head 316 Stainless Steel, marine grade. Ultimate corrosion resistance 20pcs .23" Diameter Low profile flat head, painted black, with Star Drive, T40 IRC/IBC Code Compliant Can be used instead of lags or through-bolts Approved for ACQ lumber Speed Knurl threading for reduced driving torque Type 17 point for fast starts and reduced splitting
$121.36 $103.68
-
T-Nuts, Stainless Steel
Stainless Steel T-Nuts (Tee Nuts) 3 or 4 prong - see chart for details Great for cabinetry and woodworking Nuts install flush with the wood surface Standard UNC coarse threads Sold by the piece, discounts when you buy 100 or more.
$0.41 - $1.88
-
Threaded Rod, Stainless Steel
18-8 & 316 Stainless Steel You may cut stainless steel threaded rod to the desired length with a diamond or carborundum blade Ideal for applications requiring a longer length bolt Be sure to use anti-seize compound or lubricant like WD-40 to prevent thread seizing. Approved for use in ACQ lumber 6 foot lengths are available in most diameters. *Depending on size, minimums may apply*Does not qualify for free shipping. Shipping details in additional information section below
$4.44 - $98.10
You have seen 288 out of 320 products
