Products
-
15° Wire Coil, High Pressure Ballistic Pins for Concrete and Concrete Block
For attaching hat channel, drywall track, stucco mesh & waterproofing sheet to concrete & concrete block Mechanically Galvanized 3600 pins/box 120 pins per coil Fits: NailPro NPCN-3100 coil tool
$249.00 - $292.00
-
Wedge-All, Wedge Anchor, 316 Stainless Steel
The WEDGE-ALL® wedge anchors are a non-bottom bearing, wedge style expansion anchor for use in solid concrete or grout filled masonry.One-piece, wrap-around clip ensures uniform holding capacityThreaded end is chamfered for ease of starting nutOne piece wrap around clipSupplied with a nut and washerThreaded end is chamfered for ease of starting nutThreaded studs are set by tightening the nut Discontinued product, limited quantities available
$11.15 - $66.95
-
Pro Plug System for Versatex Trim, 50 Lin Ft, Stainless Steel
The PRO PLUG® System for Versatex is the superior plugging system for trim! It combines screw down strength with the beauty of a hidden fastener system. Install in 2 easy steps! Set the screw with the PRO PLUG PVC Tool and tap in the Kleer plug with a hammer. This 50 linear ft kit includes: (75) #10 x 2-3/4" Epoxy Coated Steel Screws (85) plugs The Pro Plug Tool is needed for installation and is not included in the kit. Add it on.
$67.35
-
Pro Plug System for Kleer Trim, 50 Lin Ft, Stainless Steel
The PRO PLUG® System for Kleer is the superior plugging system for trim! It combines screw down strength with the beauty of a hidden fastener system. Install in 2 easy steps! Set the screw with the PRO PLUG PVC Tool and tap in the Kleer plug with a hammer. This 50 linear ft kit includes: (75) #10 x 2-3/4" Epoxy Coated Steel Screws (85) plugs The Pro Plug Tool is needed for installation and is not included in the kit. Add it on.
$67.30
-
Pro Plug System for Versatex Trim, 50 Lin Ft, Epoxy Kit
The PRO PLUG® System for Versatex is the superior plugging system for trim! It combines screw down strength with the beauty of a hidden fastener system. Install in 2 easy steps! Set the screw with the PRO PLUG PVC Tool and tap in the Versatexl plug with a hammer. This 50 linear ft kit includes: (75) #10 x 2-3/4" Epoxy Coated Steel Screws (85) plugs The Pro Plug Tool is needed for installation and is not included in the kit.
$39.15
-
Pro Plug System for Kleer Trim, 50 Lin Ft, Epoxy Kit
The PRO PLUG® System for Kleer is the superior plugging system for trim! It combines screw down strength with the beauty of a hidden fastener system. Install in 2 easy steps! Set the screw with the PRO PLUG PVC Tool and tap in the Kleer plug with a hammer. This 50 linear ft kit includes: (75) #10 x 2-3/4" Epoxy Coated Steel Screws (85) plugs The Pro Plug Tool is needed for installation and is not included in the kit.
$39.15
-
Simpson DJT14SS Deck Joist Tie, 14 Gauge, Stainless Steel
Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance Deck Joist Tie, designed to attach 2x deck joists to the side of 4x or larger support post It is recommended to install on post first Minimum 2x4 joist and 4x4 post Supplied with 1/4" x 1-1/2" type 316 stainless steel SDS screws
$28.45
-
Simpson TA9SS Staircase Angle, 9", 12 Gauge, Stainless Steel
Made in the USA For use in structurally sound staircase framing Ties the stair tread to the stringer Install one TA angle at each end of stair tread The Simpson Strong-Tie® TA eliminates costly conventional notching Attached to tread & stringer with ¼” x 1-1/2” Stainless Simpson SDS screws Code compliant
$49.78
-
Simpson MTS20SS, 20" Medium Twist Strap, 16 Gauge, Stainless Steel
Made in the USA Twist straps provide tension connections between two wood members Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners
$26.70
-
Simpson MSTA36SS Medium Strap Tie, 18 Gauge, Stainless Steel
Made in the USA Straight straps are used to transfer tension loads in a wide variety of applications Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners
$49.50
-
Simpson H10ASS Hurricane Tie, 18 Gauge, Stainless Steel
Made in the USA Features several configurations for wind and seismic resistant ties for trusses and rafters Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners
$19.85
-
Simpson SUL Single 2 x 4 Skewed Left 45° Joist Hanger - Stainless Steel
The SU series of hangers are skewed 45° left or right. Angled nail slots direct nails for proper placement. These hangers will normally accommodate a 40° - 50° skew. The letter "L" in the code designates left skew. The letter "R" designates right skew. Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance Features several configurations for wind and seismic resistance ties for trusses and rafters. Install with specified stainless steel fasteners
$38.85
-
Simpson SUR Single 2 x 4 Skewed Right 45° Joist Hanger - Stainless Steel
The SU series of hangers are skewed 45° left or right. Angled nail slots direct nails for proper placement. These hangers will normally accommodate a 40° - 50° skew. The letter "L" in the code designates left skew. The letter "R" designates right skew. Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance Features several configurations for wind and seismic resistance ties for trusses and rafters. Install with specified stainless steel fasteners
$38.85
You have seen 301 out of 301 products
