Products
-
Self-Drill Finishing Screws, 410SS
For Attaching Wood Siding, Wood Panels and Metal Trim to Steel Studs Screws have a trim head, #3 drill point and T-15 star drive. Triple strength corrosion resistance: 410 stainless steel + Xylan coating + Bright hardening Also perfect for use with stainless steel, aluminum and steel deck framing systems Drill point with auger tip for self tapping
$70.15 - $220.05
-
Shake and Shingle Nails, Stainless Steel
304 & 316 Stainless Steel Annular thread, diamond patterned head Slender shank reduces splitting Have a wider head than our standard wood siding nails to firmly secure shakes and shingles Ring shank reduces wind damage and nail head popping Ideal for natural wood shakes and shingles, including hand splits Nails should be long enough to penetrate sheathing 1/2" to 3/4" plus the shingle thickness Available in both AISI type 304 and 316 stainless steel Made in USA AISI Grade 316 Stainless Steel has lower carbon content than 305 or 302HQ and contains molybdenum for superior corrosion resistance in salt water and other highly corrosive environments. It is the grade of stainless steel to be specified in any seaside application.
$14.35 - $494.95
-
Sharx Screws for Marine Use, 316SS
Type 316 Stainless Steel for Superior Corrosion Resistance Sharx Marine Screws are made of salt water safe type 316 Stainless Steel. Use in composite materials, fiberglass, engineered wood products such as plywood, OSB, laminated wood veneers and wood substitutes High-low thread form with "teeth" bites fast and holds tight Strength compares favorably with that of carbon steel fasteners Screws up to 1" in length are fully threaded; screws more than 1" long are threaded 2/3 of the shank length #2 Phillips drive; Extra sharp point Also available in pan head
$15.30 - $393.50
-
Simpson A34SS Framing Angle Anchor - Stainless Steel
This framing angle designed to be used in various connections. Made in the USA Features a speed prong to easily hold connector in place while fastening with nails or SD screws Install with specified stainless steel fasteners
$4.70
-
Simpson 15° Wire Coil Siding Nails, 1-1/4" x 0.092", 1800pc, 316SS
15° Coil Siding Nails 1800pc Box Ring Shank 316 Stainless Steel for coastal environments Made in the USA Diamond Point
$128.26 $107.75
-
Simpson A35SS 6-Way Framing Angle Anchor - Stainless Steel
Made in the USA Reversable and bendable one time to fit your application Features a speed prong to easily hold connector in place while fastening with nails Install with specified stainless steel fasteners
$5.15
-
Simpson ABU44SS 4 x 4 Adjustable Post Base - Stainless Steel
Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance The ABU series are adjustable post bases with uplift. They have a 1” standoff for the post to help prevent end rot and are designed for maximum uplift performance New concrete- May be fastened to new (wet) concrete with embedded specified stainless anchors Cured Concrete- Use specified wedge anchor, Titen HD® concrete screw or cast-in-place stainless steel threaded stirrup set with specified acrylic or epoxy adhesive. May be fastened to stirrup with specified nails, stainless SD screws or bolts to achieve the same upload performance
$122.60
-
Simpson ABU66SS 6 x 6 Adjustable Post Base - Stainless Steel
Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance The ABU series are adjustable post bases with uplift. They have a 1” standoff for the post to help prevent end rot and are designed for maximum uplift performance New concrete- May be fastened to new (wet) concrete with embedded specified stainless anchors Cured Concrete- Use specified wedge anchor, Titen HD® concrete screw or cast-in-place stainless steel threaded stirrup set with specified acrylic or epoxy adhesive. May be fastened to stirrup with specified nails, stainless SD screws or bolts to achieve the same upload performance
$201.55
-
Simpson ABU88SS 8 x 8 Adjustable Post Base - Stainless Steel
Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance The ABU series are adjustable post bases with uplift. They have a 1” standoff for the post to help prevent end rot and are designed for maximum uplift performance New concrete- May be fastened to new (wet) concrete with embedded specified stainless anchors Cured Concrete- Use specified wedge anchor, Titen HD® concrete screw or cast-in-place stainless steel threaded stuf set with specified acrylic or epoxy adhesive. May be fastened to stirrup with specified nails, stainless SD screws or bolts to achieve the same upload performance
$626.50
-
Simpson AC4SS 4 x 4 Adjustable Post Cap (pair Left & Right) - Stainless Steel
T connection. Provides connection between a beam and a post with one cap- no need for left and right pieces. Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners
$61.20
-
Simpson AC6SS 6 x 6 Adjustable Post Cap (pair Left & Right) - Stainless Steel
T connection. Provides connection between a beam and a post with one cap- no need for left and right pieces. Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners
$87.45
-
Simpson ACE4SS 4 x 4 Post End Cap (pair Left & Right) - Stainless Steel
For end cap connection, providing connection between a beam and a post. Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance Sold in pairs Install with specified stainless steel fasteners
$40.70
-
Simpson BC40SS 4 x 4 Half Base - Stainless Steel
Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance Post base, light gauge for light duty connections Install with specified stainless steel fasteners
$40.50
-
Simpson BC46SS 4 x 6 Post Cap 316SS
18 Gauge Designed to connect a beam to a post Opposing flanges provide lateral resistance Made in the USA 316 Stainless Steel for coastal environments
$50.75 $37.68
-
Simpson BC4SS 4 x 4 Dual Post Base/Cap - Stainless Steel
Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance Dual purpose post cap/base for light cap or base connections Install with specified stainless steel fasteners
$57.85
-
Simpson BCS2-3/6SS, 2-3 x 6 Post Cap, 316SS
Connects a multi-ply member beam to a post For Triple 2x beam, 6x post Provides lateral and uplift support 18 Gauge Made in the USA 316 Stainless Steel
$79.50 $62.63
-
Simpson CS16SS-R Coil Strap, 16 Gauge, 25 ft Roll, Stainless Steel
Made in the USA Coiled strap is a continuous utility strap. Built to resist tension and uplift. Nail slots provided for easy installation Continuous utility strap can be cut to length on the job site Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners
$277.85
-
Simpson DJT14SS Deck Joist Tie, 14 Gauge, Stainless Steel
Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance Deck Joist Tie, designed to attach 2x deck joists to the side of 4x or larger support post It is recommended to install on post first Minimum 2x4 joist and 4x4 post Supplied with 1/4" x 1-1/2" type 316 stainless steel SDS screws
$28.45
-
Simpson DTT2SS Deck Tension Tie, 14 Gauge, with 1.5" Screws, Stainless Steel
Made in the USA Type 316 Stainless Steel for the ultimate in corrosion resistance Can be used for a guardrail to post connection or lateral load connections Install with specified stainless steel fasteners Code compliant
$39.70
-
Simpson H10ASS Hurricane Tie, 18 Gauge, Stainless Steel
Made in the USA Features several configurations for wind and seismic resistant ties for trusses and rafters Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners
$19.85
-
Simpson H2.5ASS Hurricane Tie, 18 Gauge, Stainless Steel
Made in the USA Features several configurations for wind and seismic resistant ties for trusses and rafters Replaces the H2.5SS Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners
$4.58
-
Simpson H2ASS Hurricane Tie, 18 Gauge, Stainless Steel
Made in the USA Features several configurations for wind and seismic resistant ties for trusses and rafters Replaces the H2SS Type 316L Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners
$11.10
-
Simpson H3SS Hurricane Tie (Pair L&R), 18 Gauge, Stainless Steel
Made in the USA Features several configurations for wind and seismic resistant ties for trusses and rafters Sold in pairs, right and left Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners
$8.95
-
Simpson H8SS Hurricane Tie, 18 Gauge, Stainless Steel
Made in the USA Features several configurations for wind and seismic resistant ties for trusses and rafters Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners Approved for installation with SD Connector Screws
$13.05
-
Simpson HUC Double 2 x 10 Concealed Flange Joist Hanger - Stainless Steel
Ideal for sight exposed connections and end of ledger/rim joist installations Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners Under certain conditions, alternative size nails or Simpson SD screws may be substituted. Note that it may significantly alter load capacity. See the nail substitution chart. Caution! - Do not bend or remove tabs or alter hanger in any way
$75.50
-
Simpson HUC Double 2 x 8 Concealed Flange Joist Hanger - Stainless Steel
Ideal for sight exposed connections and end of ledger/rim joist installations Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners Under certain conditions, alternative size nails or Simpson SD screws may be substituted. Note that it may significantly alter load capacity. See the nail substitution chart. Caution! - Do not bend or remove tabs or alter hanger in any way
$68.50
-
Simpson LCE4SS Light Post Cap (pair Left & Right) - Stainless Steel
For end cap connection, providing connection between the end of beam and a post. Provides maximum versatility. May be used for various size member(beam) and end post size connections Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners
$60.75
-
Simpson LS50SS Skewable L Angle - Stainless Steel
Made in the USA Reinforcing and adjustable angle Site bendable (one time) from 0° - 130° to fit your application. Used for joist framing where a standard hanger isn’t practical. Bending more than once will cause metal fatigue and severely reduced load capacity.
$25.65
-
Simpson LSCSS Adjustable Stair Stringer Connector, 18 Gauge, Stainless Steel
Made in the USA Makes stair-stringer connections fast and easy Type 316 Stainless Steel for the ultimate in corrosion resistance Provides a concealed connection between the stair stringer and the carrying header or rim joist Replaces costly framing & toe-nailing Use for both left and right applications Install with specified stainless steel fasteners
$36.85
-
Simpson LTS12SS, 20" Light Twist Strap, 18 Gauge, Stainless Steel
Made in the USA Twist straps provide tension connections between two wood members Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners
$12.40
-
Simpson LTS18SS, 18" Light Twist Strap, 18 Gauge, Stainless Steel
Made in the USA Twist straps provide tension connections between two wood members Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners
$19.00
-
Simpson LUC Single 2 x 10 Concealed Flange Joist Hanger - Stainless Steel
Ideal for sight exposed connections and end of ledger/rim joist installations Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners Under certain conditions, alternative size nails or Simpson SD screws may be substituted. Note that it may significantly alter load capacity. See the nail substitution chart. Caution! - Do not bend or remove tabs or alter hanger in any way
$37.50
-
Simpson LUC Single 2 x 6 Concealed Flange Joist Hanger - Stainless Steel
Ideal for sight exposed connections and end of ledger/rim joist installations Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners Under certain conditions, alternative size nails or Simpson SD screws may be substituted. Note that it may significantly alter load capacity. See the nail substitution chart. Caution! - Do not bend or remove tabs or alter hanger in any way
$34.15
-
Simpson LUS Double 2 x 10 Face Mount Joist Hanger - Stainless Steel
Made in the USA with Type 316 (low Carbon) Stainless Steel 316 stainless provides the highest salt water corrosion resistance of the 316 types. Appropriate for marine and seaside applications and in other severe conditions where corrosion is a concern Must be installed with specified stainless steel fasteners Patented double shear nailing distributes the load through 2 points on each joist for greater strength. The nails slant through the joist into the header, not only fastening the hanger but also helping to carry some of the load. The hanger design allows for the use of fewer fasteners for faster installation Install with specified stainless steel fasteners Full length 3” or 3-1/2” hand drive nails (or 2-1/2” collated connector nails) are always required for the patented double sheer (angled) nailing. Under some conditions alternative sized fasteners may be substituted but at a potentially significant load reduction. See nail substitution chart. LUS series hangers are not intended for welded applications Caution! - Do not bend or remove tabs or alter hanger in any way
$24.30
-
Simpson LUS Double 2 x 6 Face Mount Joist Hanger - Stainless Steel
Made in the USA with Type 316 (low Carbon) Stainless Steel 316 stainless provides the highest salt water corrosion resistance of the 316 types. Appropriate for marine and seaside applications and in other severe conditions where corrosion is a concern Must be installed with specified stainless steel fasteners Patented double shear nailing distributes the load through 2 points on each joist for greater strength. The nails slant through the joist into the header, not only fastening the hanger but also helping to carry some of the load. The hanger design allows for the use of fewer fasteners for faster installation Install with specified stainless steel fasteners Full length 3” or 3-1/2” hand drive nails (or 2-1/2” collated connector nails) are always required for the patented double sheer (angled) nailing. Under some conditions alternative sized fasteners may be substituted but at a potentially significant load reduction. See nail substitution chart. LUS series hangers are not intended for welded applications Caution! - Do not bend or remove tabs or alter hanger in any way
$17.40
-
Simpson LUS Double 2 x 8 Face Mount Joist Hanger - Stainless Steel
Made in the USA with Type 316 (low Carbon) Stainless Steel 316 stainless provides the highest salt water corrosion resistance of the 316 types. Appropriate for marine and seaside applications and in other severe conditions where corrosion is a concern Must be installed with specified stainless steel fasteners Patented double shear nailing distributes the load through 2 points on each joist for greater strength. The nails slant through the joist into the header, not only fastening the hanger but also helping to carry some of the load. The hanger design allows for the use of fewer fasteners for faster installation Install with specified stainless steel fasteners Full length 3” or 3-1/2” hand drive nails (or 2-1/2” collated connector nails) are always required for the patented double sheer (angled) nailing. Under some conditions alternative sized fasteners may be substituted but at a potentially significant load reduction. See nail substitution chart. LUS series hangers are not intended for welded applications Caution! - Do not bend or remove tabs or alter hanger in any way
$20.55
-
Simpson LUS Single 2 x 10 Face Mount Joist Hanger - Stainless Steel
Made in the USA with Type 316 (low Carbon) Stainless Steel 316 stainless provides the highest salt water corrosion resistance of the 316 types. Appropriate for marine and seaside applications and in other severe conditions where corrosion is a concern Must be installed with specified stainless steel fasteners Patented double shear nailing distributes the load through 2 points on each joist for greater strength. The nails slant through the joist into the header, not only fastening the hanger but also helping to carry some of the load. The hanger design allows for the use of fewer fasteners for faster installation Install with specified stainless steel fasteners Full length 3” or 3-1/2” hand drive nails (or 2-1/2” collated connector nails) are always required for the patented double sheer (angled) nailing. Under some conditions alternative sized fasteners may be substituted but at a potentially significant load reduction. See nail substitution chart. LUS series hangers are not intended for welded applications Caution! - Do not bend or remove tabs or alter hanger in any way
$19.25
-
Simpson LUS Single 2 x 6 Face Mount Joist Hanger - Stainless Steel
Made in the USA with Type 316 (low Carbon) Stainless Steel 316 stainless provides the highest salt water corrosion resistance of the 316 types. Appropriate for marine and seaside applications and in other severe conditions where corrosion is a concern Must be installed with specified stainless steel fasteners Patented double shear nailing distributes the load through 2 points on each joist for greater strength. The nails slant through the joist into the header, not only fastening the hanger but also helping to carry some of the load. The hanger design allows for the use of fewer fasteners for faster installation Install with specified stainless steel fasteners Full length 3” or 3-1/2” hand drive nails (or 2-1/2” collated connector nails) are always required for the patented double sheer (angled) nailing. Under some conditions alternative sized fasteners may be substituted but at a potentially significant load reduction. See nail substitution chart. LUS series hangers are not intended for welded applications Caution! - Do not bend or remove tabs or alter hanger in any way
$12.15
-
Simpson LUS Single 2 x 8 Face Mount Joist Hanger - Stainless Steel
Made in the USA with Type 316 (low Carbon) Stainless Steel 316 stainless provides the highest salt water corrosion resistance of the 316 types. Appropriate for marine and seaside applications and in other severe conditions where corrosion is a concern Must be installed with specified stainless steel fasteners Patented double shear nailing distributes the load through 2 points on each joist for greater strength. The nails slant through the joist into the header, not only fastening the hanger but also helping to carry some of the load. The hanger design allows for the use of fewer fasteners for faster installation Install with specified stainless steel fasteners Full length 3” or 3-1/2” hand drive nails (or 2-1/2” collated connector nails) are always required for the patented double sheer (angled) nailing. Under some conditions alternative sized fasteners may be substituted but at a potentially significant load reduction. See nail substitution chart. LUS series hangers are not intended for welded applications Caution! - Do not bend or remove tabs or alter hanger in any way
$15.37
-
Simpson MSTA12SS Medium Strap Tie, 18 Gauge, Stainless Steel
Made in the USA Straight straps are used to transfer tension loads in a wide variety of applications Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners
$10.80
-
Simpson MSTA18SS Medium Strap Tie, 18 Gauge, Stainless Steel
Made in the USA Straight straps are used to transfer tension loads in a wide variety of applications Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners
$14.80
-
Simpson MSTA24SS Medium Strap Tie, 18 Gauge, Stainless Steel
Made in the USA Straight straps are used to transfer tension loads in a wide variety of applications Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners
$23.20
-
Simpson MSTA36SS Medium Strap Tie, 18 Gauge, Stainless Steel
Made in the USA Straight straps are used to transfer tension loads in a wide variety of applications Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners
$49.50
-
Simpson MTS12SS, 12" Medium Twist Strap, 16 Gauge, Stainless Steel
Made in the USA Twist straps provide tension connections between two wood members Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners
$11.90
-
Simpson MTS20SS, 20" Medium Twist Strap, 16 Gauge, Stainless Steel
Made in the USA Twist straps provide tension connections between two wood members Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners
$26.70
-
Simpson Strong Drive SDS Heavy-Duty Connector Screw, 25pcs, Stainless Steel
Type 316 Stainless Steel for ultimate corrosion resistance 1/4” diameter high-strength structural wood screw 3/8” hex head with 0.48” integrated washer Type-17 point enables easy driving with no pre-drilling and minimal wood splitting Used to fasten certain heavy duty framing connectors to wood members Excellent for fastening ledger boards 25pc box
$32.30 - $53.20
-
Simpson Strong-Bolt 2, Wedge Anchor, Stainless Steel
Type 316 Stainless Steel for ultimate corrosion resistance Code listed for cracked concrete and uncracked concrete See code listings Head stamped with length identification number Chamfered top to prevent mushrooming during installation Optimal choice for performance under seismic and high-wind conditions Qualified for a minimum 3-1/4” concrete thickness Tested per ACI355.2 and AC193 specifications concrete design information available in spec section below
$8.00 - $15.45
-
Simpson SUL Single 2 x 10 Skewed Left 45° Joist Hanger - Stainless Steel
The SU series of hangers are skewed 45° left or right. Angled nail slots direct nails for proper placement. These hangers will normally accommodate a 40° - 50° skew. The letter "L" in the code designates left skew. The letter "R" designates right skew. Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance Features several configurations for wind and seismic resistance ties for trusses and rafters. Install with specified stainless steel fasteners
$48.00
You have seen 240 out of 291 products
