Products
-
Simpson Strong-Bolt 2, Wedge Anchor, Stainless Steel
Type 316 Stainless Steel for ultimate corrosion resistance Code listed for cracked concrete and uncracked concrete See code listings Head stamped with length identification number Chamfered top to prevent mushrooming during installation Optimal choice for performance under seismic and high-wind conditions Qualified for a minimum 3-1/4” concrete thickness Tested per ACI355.2 and AC193 specifications concrete design information available in spec section below
$8.00 - $15.45
-
Pro Plug System for Trex Decking, 100 Lin Ft Kit with Epoxy Screws
Packs are 100 lin ft (40 sq ft) and include everything you need, the plugs, screws and Pro Plug Tool. PRO PLUG® for Trex® is a superior plugging system for Trex® decking & trim combining screw down strength with the beauty of a hidden fastener system Install in 2 easy steps...Set the screw with the PRO PLUG PVC Tool and tap in the Trex® plug with a hammer. Plugs are cut from actual Trex® board for a perfect match Kits available in Stainless Steel or Epoxy Coated Carbon Steel The PRO PLUG PVC Tool drives fasteners to the correct depth every time. Its No Cam-Out Auto Stop™ prevents screw recess from stripping This 100 lin. ft. kit (40 sq feet) includes: (150) 2-3/4" Epoxy Coated Carbon Steel Screws with a T20 star recess (165) Trex® Plugs cut from the original Trex® material for a perfect match (1) Pro Plug Tool for PVC Trex Enhance kits include 1 scalloped profile template
$80.65
-
Simpson H3SS Hurricane Tie (Pair L&R), 18 Gauge, Stainless Steel
Made in the USA Features several configurations for wind and seismic resistant ties for trusses and rafters Sold in pairs, right and left Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners
$8.95
-
Simpson LS50SS Skewable L Angle - Stainless Steel
Made in the USA Reinforcing and adjustable angle Site bendable (one time) from 0° - 130° to fit your application. Used for joist framing where a standard hanger isn’t practical. Bending more than once will cause metal fatigue and severely reduced load capacity.
$25.65
-
ML28SS 2 x 8 Medium L Angle, 316
2 x 8" 12 gauge 316 Stainless Steel Use with SDS Heavy-Duty Connector Screws
$73.19
-
1/4" Lag Screws, Stainless Steel
Type 18-8 & 316 Stainless Steel Choose from 4 diameters Hard to find long lengths Length is measured from under head to tip of screw Be sure to use anti-seize compound or lubricant like WD-40 to prevent thread seizing.
$0.22 - $28.50
-
Pro Plug System for Royal Trim, 50 Lin Ft, Stainless Steel
The PRO PLUG® System for Royal/Celect is the superior plugging system for trim! It combines screw down strength with the beauty of a hidden fastener system. Install in 2 easy steps! Set the screw with the PRO PLUG PVC Tool and tap in the Kleer plug with a hammer. This 50 linear ft kit includes: (75) #10 x 2-3/4" Epoxy Coated Steel Screws (85) plugs The Pro Plug Tool is needed for installation and is not included in the kit. Add it on.
$67.30
-
Pro Plug System for Trex Decking, 100 Lin Ft Kit with Stainless Steel Screws
Packages are 100 lin ft (40 sq ft) and include the Pro Plug Tool. The PRO PLUG® System is a superior plugging system for Trex® decking & trim combining screw down strength with the beauty of a hidden fastener system Install in 2 easy steps...Set the screw with the PRO PLUG PVC Tool and tap in the Trex® plug with a hammer. Plugs are cut from actual Trex® board for a perfect match Kit covers 40 square feet of decking Also available with epoxy coated carbon steel screws The Pro Plug Tool is needed for installation and is included in the kit. Nothing else to buy! The 100 lin ft. kit (40 sq ft) includes: ✔ (150) 2-1/2" Type 305 Stainless Steel Screws with a T20 star recess ✔ (165) Trex® Plugs cut from the original Trex® material for a perfect match ✔ Available in Stainless Steel or Epoxy Coated Carbon Steel ✔ The Pro Plug Tool is included in this kit. ✔ The PRO PLUG PVC Tool drives fasteners to the correct depth every time. Its No Cam-Out Auto Stop™ prevents screw recess from stripping
$136.00
-
Pro Plug System for Trex Enhance Decking, 100 Lin Ft Kit with Stainless Steel Screws
Packages are 100 lin ft (40 sq ft) and include the Pro Plug Tool. PRO PLUG® for Trex® Enhance is the newly released plugging system for Trex® Enhance scalloped profile decking. It combines screw-down strength with the beauty of a hidden fastener system. Install in 2 easy steps...Set the screw with the PRO PLUG PVC Tool and tap in the Trex® plug with a hammer. Plugs are cut from actual Trex® board for a perfect match Kit covers 40 square feet of decking Also available with epoxy coated carbon steel screws The Pro Plug Tool is needed for installation and is included in the kit. Nothing else to buy! The 100 lin ft. kit (40 sq ft) includes: ✔ (150) 2-1/2" Type 305 Stainless Steel Screws with a T20 star recess ✔ (165) Trex® Plugs cut from the original Trex® material for a perfect match ✔ (1) scalloped profile template ✔ Available in Stainless Steel or Epoxy Coated Carbon Steel ✔ The Pro Plug Tool is included in this kit. ✔ The PRO PLUG PVC Tool drives fasteners to the correct depth every time. Its No Cam-Out Auto Stop™ prevents screw recess from stripping
$128.98
-
25° Angled Finish Nails, 15 Gauge, 2000pc Box, 304 Stainless Steel
Fits 15 DA BostitchType 304 Stainless Steel 15 gauge smooth shank- brad head 25° tape collated Type 304 Stainless Steel packaged in 2m boxes Approved for use in ACQ lumber Commonly Used Tools for Installation Bostitch: FN59, GFN1564K, N59N, N60FN, N60FN-2, N62FN, N62FN-2, N62FNK, N66FNK-2
$85.00 - $137.20
-
Titebond III Wood Glue
4 oz Bottle Easy to Apply Superior Strength Paintable Cleans up with water
$4.99
-
Pro Plug® for Wood #8 replacement bit 5 pak
Replacement bit pack for the Pro Plug Tool for Wood. Includes 5 replacement drill bits Creates a 1-1/2" (38mm) hole To be used with the Pro Plug System for Wood
$22.25
-
21° Plastic Strip, .131", Duplex Head Nail, Smooth, Plain Steel
For temporary wood structures, concrete forms, pre-hung door manufacturing, blocking for shipment, etc. 2000 nails/box Approx.40 nails per strip Fits: NailPro NPCN-9021D
$97.00 - $124.00
-
Tiger Claw TC-SG Scrails (Screw Nails) for TC-G, 6 x 1-1/2", 930 pcs, Carbon Steel
33° Collated Scrails for the Tiger Claw Pneumatic Install Gun Used to install Tiger Claw hidden deck fastening clips like the TC-G, covers 500 sq ft Approved for use in ACQ lumber! Use a #1 or #2 phillips driver bit to remove after initial install if needed Screws are #6 x 1-1/2" and are made of Black Oxide Coated Carbon Steel
$161.20
-
Titen Concrete and Masonry Screw, 410 Stainless Steel, 100pc Box
Type 410 Stainless Steel for enhanced corrosion protectionAvailable in Hex and Phillips Flat Head, 100pc BoxIdeal for attaching components like light fixtures or electrical boxes to concrete and masonryGreat for concrete, brick, grout-filled CMU and hollow-block applicationsSuitable for some preservative-treaded wood applicationsDrill Bits included in each box
$75.55 - $121.60
-
Pro Plug System for Restoration Millwork Trim, 400 Plugs
The Pro Plug System for Restoration Millwork trim contains 400 plugs for 250 lin ft. PRO PLUG® for PVC is a superior plugging system for PVC decking & trim. It combines screw down strength with the beauty of a hidden fastener system Install in 2 easy steps...Set the screw with the PRO PLUG PVC Tool and tap in the PVC plug with a hammer. PRO PLUG® PVC Plugs are made from the Restoration Millwork Trim board so they are a perfect match! The PRO PLUG® PVC Tool drives fasteners to the correct depth every time. Its No Cam-Out Auto Stop™ prevents screw recess from stripping
$52.00
-
Simpson DTT2SS Deck Tension Tie, 14 Gauge, with 1.5" Screws, Stainless Steel
Made in the USA Type 316 Stainless Steel for the ultimate in corrosion resistance Can be used for a guardrail to post connection or lateral load connections Install with specified stainless steel fasteners Code compliant
$39.70
-
Simpson MSTA24SS Medium Strap Tie, 18 Gauge, Stainless Steel
Made in the USA Straight straps are used to transfer tension loads in a wide variety of applications Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners
$23.20
-
Simpson AC6SS 6 x 6 Adjustable Post Cap - Stainless Steel
T connection. Provides a connection between a beam and a post with one cap- 2 pcs required per cap. Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners
$45.05
-
Simpson LUS Double 2 x 6 Face Mount Joist Hanger - Stainless Steel
Made in the USA with Type 316 (low Carbon) Stainless Steel 316 stainless provides the highest salt water corrosion resistance of the 316 types. Appropriate for marine and seaside applications and in other severe conditions where corrosion is a concern Must be installed with specified stainless steel fasteners Patented double shear nailing distributes the load through 2 points on each joist for greater strength. The nails slant through the joist into the header, not only fastening the hanger but also helping to carry some of the load. The hanger design allows for the use of fewer fasteners for faster installation Install with specified stainless steel fasteners Full length 3” or 3-1/2” hand drive nails (or 2-1/2” collated connector nails) are always required for the patented double sheer (angled) nailing. Under some conditions alternative sized fasteners may be substituted but at a potentially significant load reduction. See nail substitution chart. LUS series hangers are not intended for welded applications Caution! - Do not bend or remove tabs or alter hanger in any way
$17.40
-
Deckfast Fascia Tool
Creates a perfect hole & depth every time! Fascia System allows for the expansion & contraction of fascia boards For use with Deckfast Fascia System Screws No Cam-Out Auto-Stop mechanism prevents screw recess stripping Free Spinning Stop Collar protects the fascia surface Rubber O-ring prevents damage to the work surface once the target depth is reached Fascia Tool Features ✔ Free Spinning Stop Collar with O-Ring: The stop collar spins free of the drill bit, prevent marring or burnishing of the fascia board surface. ✔ Anti-clog Debris Cavity: The cavity gathers waste material, keeping it clear of the countersink. ✔ Pre-set Countersink: The Fascia Tool matches the head diameter and countersink depth of the Fascia Screw for the perfect hole and fit. ✔ Pre-set Shaft length: Together with the countersink, the overall hole depth is designed for use with fascia boards from 1/2" to 3/4" thick.
$22.30
-
15° Wire Coil, High Pressure for Attachments to Steel
Use to attach siding, plywood, DensGlass®, USG SecureRock®, HardiePlank®, Hardie® 5/4" trim, and more to steel. Choose from a Dacrotized Coating, Galvanized Steel or Stainless Steel Knurled Hardened Pins See Spec Chart for nail details and Gun compatibility
$237.00 - $772.00
-
Clip & Rip Universal Deck Clip, Stainless Steel
New Universal Deck Clip System! New System design allows for fast and easy installation Use with pre-grooved composite, PVC, or wood decking Clips are collated with preinstalled screws, screws available in 305 Stainless or marine grade 316 Stainless Steel Screws are 1-3/4" long with a T-15 Star Drive Installation and board compatibility information Do not use an impact driver to install Creates 3/16" gap spacing between deck boards First and last boards require starter clips
$78.05 - $348.90
-
Deckwise Wisewrap Ledger Tape, 12" x 25'
12" x 25' ft Roll For Ledger Boards & Deck Posts DeckWise® Ledger Tape is a malleable polyethylene waterproof wood flashing material using a rubberized asphalt mastic adhesive. ✔ Durable, self-adhesive flashing. Protects deck ledger boards against water ✔ When applied over ledger boards, it creates a waterproof barrier that trains water to move over and away from the board. ✔ Wrap in-ground wooden deck posts to provide a barrier against fungi and soil moisture! ✔ Self seals around fasteners preventing moisture from penetrating the barrier. ✔ Made in the USA
$37.98
-
Deckwise Brightener, Part 2, 16 oz
Deck & Wood Brightener Part 2 Removes tannin stains from woods susceptible to extractive bleeding, such as cedar & redwood Active ingredient Oxalic Acid helps to neutralize pH of the wood after cleaning. This process allows for even absorption of stain or oil and increases it's longevity! Perfect for preparing deck boards for Ipe Oil™ Hardwood Deck Finish Brightener also removes rust and fungi stains while evening out the color across board. No more discoloration! Cleaning and brightening is recommended at least once a year for maintenance and restoration
$17.95
-
Pro Plug System for Boral TruExterior Trim, 50 Lin Ft, Stainless Steel
The System for Boral TruExterior is the superior plugging system for trim! It combines screw down strength with the beauty of a hidden fastener system. Install in 2 easy steps! Set the screw with the PRO PLUG PVC Tool and tap in the Boral plug with a hammer. This 50 lin ft kit includes: (75) #10 x 2-1/2" Stainless Steel Screws (85) plugs The Pro Plug Tool is needed for installation and is not included in the kit. Add it on.
$67.30
-
Pro Plug System for Trex Decking, 100 Sq Ft Kit with Epoxy Screws
Packs are 100 sq ft and include everything you need, the plugs, screws and Pro Plug Tool. PRO PLUG® for Trex® is a superior plugging system for Trex® decking & trim combining screw down strength with the beauty of a hidden fastener system Install in 2 easy steps...Set the screw with the PRO PLUG PVC Tool and tap in the Trex® plug with a hammer. Plugs are cut from actual Trex® board for a perfect match Kits available in Stainless Steel or Epoxy Coated Carbon Steel The PRO PLUG PVC Tool drives fasteners to the correct depth every time. Its No Cam-Out Auto Stop™ prevents screw recess from stripping This 100 sq. ft. kit includes: (350) 2-3/4" Epoxy Coated Carbon Steel Screws with a T20 star recess (375) Trex® Plugs cut from the original Trex® material for a perfect match (1) Pro Plug Tool for PVC Trex Enhance kits include 1 scalloped profile template
$151.65
-
U2 Fasteners Re-Fine Composite Screw, 316 Stainless Steel
Perfect for trim board, railings and fine carpentry Small Finishing head, 0.196" T-10 Star Drive Double twist at the head provides drawing strength Tapper Point allows for the screw to easily pierce the material and alleviate strain. 316 Stainless Steel, marine-grade for ultimate corrosion resistance.
$141.30
-
Simpson CS16SS-R Coil Strap, 16 Gauge, 25 ft Roll, Stainless Steel
Made in the USA Coiled strap is a continuous utility strap. Built to resist tension and uplift. Nail slots provided for easy installation Continuous utility strap can be cut to length on the job site Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners
$277.85
-
15° Wire Coil, Smooth, High Pressure Ballistic Pins
For attachments to concrete & concrete block Available in Ultra Stainless Steel or Galvanized Great, money-saving alternative to tapcons and furring strips!
$145.75 - $567.00
-
Tiger Claw TC-G for Grooved Decking 90 pcs
The TC-G is the perfect hidden deck clip created to be used with 5/4" grooved deck boards. You may also use the TC-G with TC-G slot cutter on non grooved deck boards. See product demo video below! Spacer tabs on the clip automatically gap the decking 3/16" The easy-to-install clips are made of 304 Stainless Steel with a black oxide coating. Minimizes cupping & splitting of deck boards 25-year warranty by the manufacturer Covers 50 sq ft of decking Use in Trex®, Wolf™ PVC, Ipe, Teak, Cambara, Meranti, Fiberon Horizon®, ChoiceDek, MoistureShield™, Veranda® Decking, and more! More brands listed in Product Details link Below. Not designed for AZEK®, Timbertech® and Rhino Deck®TC-G 90 pc Kit Contents: (90) Clips (92) 1-5/8" stainless steel screws (1) star drive bit Installation Instructions: TCG Full Product Details: TC-G
$62.05
-
Pro Plug System for Boral TruExterior Trim, 50 Lin Ft, Epoxy Kit
The PRO PLUG® System for Boral TruExterior is the superior plugging system for trim! It combines screw down strength with the beauty of a hidden fastener system. Install in 2 easy steps! Set the screw with the PRO PLUG PVC Tool and tap in the Boral plug with a hammer. This 50 linear ft kit includes: (75) #10 x 2-3/4" Epoxy Coated Steel Screws (85) plugs The Pro Plug Tool is needed for installation and is not included in the kit. br>
$39.15
-
T-Nuts, Stainless Steel
Stainless Steel T-Nuts (Tee Nuts) 3 or 4 prong - see chart for details Great for cabinetry and woodworking Nuts install flush with the wood surface Standard UNC coarse threads Sold by the piece, discounts when you buy 100 or more.
$0.41 - $1.88
-
U2 Fasteners Cap Screw, Modified Truss Head, 305 Stainless Steel
U2's Cap Screw is designed for interior and exterior use. Modified low-profile truss head with star drive Perfect for cabinets, trim, moulding, light-duty framing, vinyl siding and window installations. Dome head features a cutting ribbon underhead The Tapper Point is designed to easily pierce while evenly dispersing any strain on the material. The tip of the screw begins with a Cork Screw start. When paired with the blade cutting thread, this screw is installed quickly and easily. As with all U2 screws, it features a tight star recess that holds the U2 bit tightly. It is such a perfect fit that this screw can be installed with one hand. This screw takes a T15 bit.
$25.65 - $148.35
-
Simpson H8SS Hurricane Tie, 18 Gauge, Stainless Steel
Made in the USA Features several configurations for wind and seismic resistant ties for trusses and rafters Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners Approved for installation with SD Connector Screws
$13.05
-
Simpson BC4SS 4 x 4 Dual Post Base/Cap - Stainless Steel
Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance Dual purpose post cap/base for light cap or base connections Install with specified stainless steel fasteners
$57.85
-
Simpson LUC Single 2 x 6 Concealed Flange Joist Hanger - Stainless Steel
Ideal for sight exposed connections and end of ledger/rim joist installations Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners Under certain conditions, alternative size nails or Simpson SD screws may be substituted. Note that it may significantly alter load capacity. See the nail substitution chart. Caution! - Do not bend or remove tabs or alter hanger in any way
$34.15
-
NailPro® 1" x 16 ga E. Galv. metal washer
1" round flat metal washers for attaching 2X Plates to concrete
$111.30
-
Tiger Claw Router bit groove cutter for TC-G
Carbide blade for long lasting consistent results Cuts grooves in 5/4" decking for installation of TC-G hidden deck clips For use with many handheld routing tools, simply route out the portion of the decking directly above the framing joists to create a perfectly positioned grooved to accept hidden fastening clips.
$60.75
-
U2 Fasteners Fine Screw, 316 Stainless Steel
The Fine Screw™ is U2's trim screw design. It has a small finishing head and is used as a self tapping fastener for fine woodworking. This screw has a specially designed star drive that holds U2 bits so tightly that the screws can be installed one-handed. Tapper point with blade cutting threads that help alleviate strain on the material and pierces easily. Stainless is perfect for exterior finishing work on deck railings, wood trim, stairs, and more. They are approved for use in pressure-treated lumber and are great for finish work and fine carpentry
$141.30 - $148.35
-
Simpson MSTA12SS Medium Strap Tie, 18 Gauge, Stainless Steel
Made in the USA Straight straps are used to transfer tension loads in a wide variety of applications Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners
$10.80
-
Simpson ACE4SS 4 x 4 Post End Cap (pair Left & Right) - Stainless Steel
For end cap connection, providing connection between a beam and a post. Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance Sold in pairs Install with specified stainless steel fasteners
$40.70
-
Simpson SUR Single 2 x 6 Skewed Right 45° Joist Hanger - Stainless Steel
The SU series of hangers are skewed 45° left or right. Angled nail slots direct nails for proper placement. These hangers will normally accommodate a 40° - 50° skew. The letter "L" in the code designates left skew. The letter "R" designates right skew. Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance Features several configurations for wind and seismic resistance ties for trusses and rafters. Install with specified stainless steel fasteners
$46.15
-
Simpson HUC Double 2 x 8 Concealed Flange Joist Hanger - Stainless Steel
Ideal for sight exposed connections and end of ledger/rim joist installations Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners Under certain conditions, alternative size nails or Simpson SD screws may be substituted. Note that it may significantly alter load capacity. See the nail substitution chart. Caution! - Do not bend or remove tabs or alter hanger in any way
$68.50
-
Simpson LUC Single 2 x 10 Concealed Flange Joist Hanger - Stainless Steel
Ideal for sight exposed connections and end of ledger/rim joist installations Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners Under certain conditions, alternative size nails or Simpson SD screws may be substituted. Note that it may significantly alter load capacity. See the nail substitution chart. Caution! - Do not bend or remove tabs or alter hanger in any way
$37.50
-
U2 Fasteners Universal Screw, Carbon Steel
The Universal Screw™ is great for use in deck construction. Tapper Point, consisting of the Cork Screw Start and Blade Cutting Thread allows the screw to pierce materials easily. Screws feature a Star Recess system that holds the U2 bits securely in place. This allows the screw to be installed one-handed. The universal screw includes nibs that help the screw to countersink into the toughest of materials. Below the smooth shank is the Reamer Thread*, which enlarges the hole to create a passage when drawing materials together and reduces tension for the screw head. Screws are Case Hardened Carbon Steel, also available in 316SS *Reamer Thread is only present on screws 2" and longer
$26.50 - $59.35
-
NailPro® NPCN-7312 magnetic attachment for 1-1/4" metal stucco washers
Fits NailPro® NPCN-7312 & NPCN-5234 air tools
$92.75
-
NailPro® NPCT-3040 magnetic attachment for 1-1/4" metal stucco washers
Fits NailPro® NPCT-3040 & NPCT-3112 air tools
$92.75
You have seen 192 out of 302 products
