Products
-
Smart-Bit Replacement Bit Packs
Replacement bit pack for the Pro Plug Tool for Wood. Includes 5 replacement drill bits Creates a 1-1/2" (38mm) hole To be used with the Pro Plug System for Wood
$19.75
-
SDWS Timber Screw, 30pc Box, 316 Stainless Steel
Installs 5x faster than a traditional Lag Screw! No predrilling or counterboaring required. Heavy-Duty structural screw Marine Grade 316 for the ultimate corrosion resistance Heavy-duty diameter, SawTooth™ point and flat washer head Easy to install - saves time and lowers installation cost Perfect for docks, wharves, piers, boardwalks and more! Use when strength and corrosion resistance are critical. Easy to back out and reinstall as needed Driver bit included in each box
$87.30 - $320.15
-
Deckwise Hardwood Brown Trim Screws, #8x2", #8 x 2-1/2", 350pcs, 305 Stainless Steel
T-15 Star Drive Type 17 pt 350 pc boxes 305 Stainless Steel Deckwise Hardwood Brown Trim screws are compatible with Ipe Clips
$57.94 - $61.72
-
Cap-Tor xd Composite Deck Screws, #10 x 2-1/2", 350pc Box, 305 Stainless Steel
For Composite & Capstock Decking CAP-TOR xd is designed for use with Trex, Timber-Tech, Fiberon, Azek and other composites & capstocks Type 305 Stainless Steel for superior corrosion resistance Extra deep T-20 star recess to minimize "wobble" at screw starting Undercut head design - a specially engineered head that cleanly penetrates the hard outer coating of capstock products Transverse™ Threading eliminates "mushroom" effect common to composite decking installed using standard deck screws. Auger Point for faster, easier entry. Helps prevent splitting Available in 15 colors to blend with a wide range of composite deck board colors Use the Deck Matcher to find the best color. For a uniform finish install using the Smart-Bit Depth Setter
$147.80
-
Headcote Trim Head #8 x 2-1/2" Screws, 2500pc Box, 305SS
Stainless Steel Screws with Color Coated Heads For Hardwood, Cedar, Redwood and Pressure Treated Decking Headcote screws are designed to work with Smart-Bit® Predrilling and Countersinking Tools, for a perfect finish. Not sure what color you need? Use the interactive Deck Matcher
$839.20
-
Simpson A35SS 6-Way Framing Angle (Anchor) - Stainless Steel
Made in the USA Reversable and bendable one time to fit your application Features a speed prong to easily hold connector in place while fastening with nails Install with specified stainless steel fasteners
$5.15
-
Tiger Claw TC-G Bucket and Scrails (Screw Nails) Combo Kit for 500 sq ft
Buy 2 Combo Kits and get the Pneumatic Installation Gun Free*! Designed for 5/4" grooved deck boards. May also use with TC-G Slot Cutter to groove your own boards Clips made of 304 Stainless Steel Automatic 3/16" gap spacing Reduces wood splitting, cupping and wood rotting. Combo Kit includes 900 TC-G Clips and 930pc box of Tiger Claw Carbon Steel Scrails (Screw Nails) Install using the Tiger Claw Pneumatic Install Gun. Installs an average of 400 sq ft of decking in just 1 hour Buy 2 Kits and the gun is free*! Some restrictions apply, contact us for details. ! Covers 500 square feet of decking Manufacturer 25 year warranty Use with Deck boards like Trex Select ChoiceDek by Lowes Fiberon Pro-Tect, Horizons, and Paramount Wolf PVC Ipe, Brazilian Redwood, Teak, Meranti and more!
$650.00
-
Deckwise Deck Board Spacers, Wise Guides
Color-Coded Deck Board Spacers Quickly & accurately provides uniform spacing of deck boards Versatile design allows use in any position between deck boards Special design prevents denting or marring of hardwood or composite boards Re-Usable - Made in the USA
$10.50 - $19.99
-
Simpson ABU66SS 6 x 6 Adjustable Post Base - Stainless Steel
Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance The ABU series are adjustable post bases with uplift. They have a 1” standoff for the post to help prevent end rot and are designed for maximum uplift performance New concrete- May be fastened to new (wet) concrete with embedded specified stainless anchors Cured Concrete- Use specified wedge anchor, Titen HD® concrete screw or cast-in-place stainless steel threaded stirrup set with specified acrylic or epoxy adhesive. May be fastened to stirrup with specified nails, stainless SD screws or bolts to achieve the same upload performance
$201.55
-
Headcote Trim Head #7 x 2-1/4" Screws, 350pc Box, 305SS
Stainless Steel Screws with Color Coated Heads For Hardwood, Cedar, Redwood and Pressure Treated Decking Headcote screws are designed to work with Smart-Bit® Predrilling and Countersinking Tools, for a perfect finish. Not sure what color you need? Use the interactive Deck Matcher
$117.50
-
Titen HD Heavy Duty Screw Anchor, Countersunk Head, 316 Stainless Steel
The Titen HD® now with countersunk head style!This high-strength screw anchor is perfect for use in cracked and uncracked concrete as well as masonry. Conveniently sold by the piece! Type 316 Stainless Steel provides long-lasting corrosion resistance. Cracked concrete code listed Provides industry leading Countersunk head leaves a flush-mount profile and clean surface appearance for exposed through-set applications performance even in seismic and wind loading conditions Installs using a standard-sized ANSI tolerance drill bit - The 3/8" Titen takes a T-50 bit, sold separately here. Removable. Great for temporary anchoring See spec table for installation pdf
$5.80 - $7.95
-
Pro Plug System for TimberTech / AZEK Decking, 100 Lin Ft Kit with Epoxy Screws
*Packs are 100 lin ft (40 sq ft) and include everything you need, the plugs, screws and Pro Plug Tool. PRO PLUG® for Azek® is a superior plugging system for Azek® / Timbertech decking & trim combining screw down strength with the beauty of a hidden fastener system ✔ Install in 2 easy steps...Set the screw with the PRO PLUG PVC Tool and tap in the Azek® plug with a hammer. ✔ Plugs are cut from actual Azek® / Timbertech board for a perfect match ✔ The PRO PLUG PVC Tool drives fasteners to the correct depth every time. Its No Cam-Out Auto Stop™ prevents screw recess from stripping 100 lin. ft. kit (40 sq feet) includes: ✔ (150) 2-3/4" Epoxy Coated Carbon Steel Screws with a T20 star recess ✔ (165) Azek® Plugs cut from the original Azek® material for a perfect match ✔ (1) Pro Plug Tool for PVC
$72.15 - $78.00
-
5/16" Lag Screws, Stainless Steel
Type 18-8 & 316 Stainless Steel Choose from 4 diameters Hard to find long lengths Length is measured from under head to tip of screw
$0.26 - $12.00
-
1/4"-20 Carriage Bolts, Stainless Steel
Type 18-8 & 316 Stainless Steel Hard to find long lengths Length is measured from under head to tip of screw Threaded portion is variable depending on length of bolt Be sure to use anti-seize compound or lubricant like WD-40 to prevent thread seizing.
$0.23 - $8.35
-
20° Angled Finish Nails, 16 Gauge, 2000pc, 304 Stainless Steel
Fits 16 ga Paslode ToolsType 304 Stainless Steel 16 gauge smooth shank - brad head 20° tape collated Fits popular Paslode IM250A and DeWalt (DC618KN) & (DC618KA) See the Nail Gun Reference Toolfor more compatible nailers Approved for use in ACQ lumber Commonly Used Tools for Installation Paslode: Impulse IM250A, T250A-F16, 900600, IM250ALiDeWalt: DC614, DC618K, DC618KN, DC618KA, DCN660BDon't see your gun listed? Click here
$61.50 - $107.20
-
U2 Fasteners Universal Screw, 316 Stainless Steel
The Universal Screw™ is great for use in deck construction. Tapper Point, consisting of the Cork Screw Start and Blade Cutting Thread allows the screw to pierce materials easily. Screws feature a Star Recess system that holds the U2 bits securely in place. This allows the screw to be installed one-handed. The universal screw includes nibs that help the screw to countersink into the toughest of materials. Below the smooth shank is the Reamer Thread*, which enlarges the hole to create a passage when drawing materials together and reduces tension for the screw head. #10 x 3-1/8" screws are Case Hardened Carbon Steel, the rest are 316 Stainless Steel *Reamer Thread is only present on screws 2" and longer
$125.05 - $1,154.02
-
Simpson LSCSS Adjustable Stair Stringer Connector, 18 Gauge, Stainless Steel
Made in the USA Makes stair-stringer connections fast and easy Type 316 Stainless Steel for the ultimate in corrosion resistance Provides a concealed connection between the stair stringer and the carrying header or rim joist Replaces costly framing & toe-nailing Use for both left and right applications Install with specified stainless steel fasteners
$36.85
-
Simpson ABU44SS 4 x 4 Adjustable Post Base - Stainless Steel
Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance The ABU series are adjustable post bases with uplift. They have a 1” standoff for the post to help prevent end rot and are designed for maximum uplift performance New concrete- May be fastened to new (wet) concrete with embedded specified stainless anchors Cured Concrete- Use specified wedge anchor, Titen HD® concrete screw or cast-in-place stainless steel threaded stirrup set with specified acrylic or epoxy adhesive. May be fastened to stirrup with specified nails, stainless SD screws or bolts to achieve the same upload performance
$122.60
-
Acorn Hex Cap Nuts, Stainless Steel
Type 18-8 and 316 Stainless Steel Sold by the pieceBuy 100 pieces or more and save
$0.16 - $8.88
-
18 Gauge Collated Straight Brads, 5000pc, 316 Stainless Steel
Type 316 Stainless Steel 18 gauge smooth shank stick brads Approved for use in ACQ Lumber Type 316 stainless brads are best suited for outdoor applications in a seaside or corrosive environment. Type 316 stainless steel will provide extra protection from salt water, salt air and chemicals like chlorine from pools and spas. Brads are ideal for finishing work, furniture, and outdoor projects. They are used to construct outdoor games such as cornhole and dartboards, storage containers for pool floats, and for racks for surf and bodyboards. Commonly Used Tools for Installation Bostitch: BT1855, BT31-1B, BT35B, BT50, BT50B, BT200K, SB-2IN1, SB-125BN, SB-1842BN, SB-1850BN, T29-30, BTFP1850K Campbell Hausfeld: B0040, CHN10100RB, CHN10499, IFN00300, NB0030, NB003008, NB0033000, SB504000, SB514000, SB524000 Craftsman; 18309, 18310, 18323, 18424, 18433, 18454, 18496, 18499, 351.153000, 351.181720, 351.181760, 351.181730, ETT3212H Hitachi; NT50AE, NT50AE2, NT45A, NT32AE, NT32AE2, NT50AD Paslode: 2138-F18II, 9010000, IM200-F18, IM200Li, T200-F18, T125-F18, F200-F18
$63.95 - $157.20
-
Square Recess Driver Bits
1" Insert Bits - A compact bit for use in wire detent chucks and drywall style guns 2" Power Bits - A ball detent style bit for use in standard and "quick release" chucks Also available in 3 packs - Save 25% over single bit price!!
$1.00
-
5/16"-18 Carriage Bolt, Stainless Steel
Type 18-8 & 316 Stainless Steel Hard to find long lengths Length is measured from under head to tip of screw Threaded portion is variable depending on length of bolt Be sure to use anti-seize compound or lubricant like WD-40 to prevent thread seizing.
$0.30 - $13.69
-
Deckwise Joist Tape, Self Adhesive Deck Flashing, 3" x 75'
Self-sealing, waterproof flashing Self-seals around fasteners to insulate deck joists from water and prevent wood rot and decay Butyl tape can be installed in cooler temperatures, safe to use in temps as low as 25° F. Can be applied to decking joists, over ledger boards, and around support posts to create a waterproof seal. Tear resistant, durable and flexible. Can be applied to dewy or non-kiln dried wood. However, it is always preferable to apply to clean, dry wood. Available in 2 sizes, see photos for the difference in width. Made in the USA!
$31.88
-
Deckwise Ipe Seal 16 oz End Grain Sealer
The popular Ipe Seal® Hardwood End Grain Sealer is now available in a user-friendly 16oz container! Apply with ease with the brush top, nothing else required for application! Container covers approximately 250 sq ft of decking. Ipe Seal wax emulsion sealant is used once on freshly cut lumber to seal and protect structural integrity. Prevents end checking or splitting on the edges of your brand new deck boards. Application recommended within 24 hrs of cutting the wood
$22.34
-
Trim Head Screws, Square Drive, Stainless Steel
Square Drive #1 Square Drive - small unobtrusive .230" head Type 17 point for fast penetration Self-countersinking trim head Square drive recess reduces driver cam-out problems Dry lubricated with non-stick film Our stainless steel trim head screws are threaded approximately 2/3 of shank Available in AISI type 305 and 316 stainless steel AISI Grade 316 Stainless Steel has a lower carbon content than 305 or 302HQ and contains molybdenum for superior corrosion resistance in salt water and other highly corrosive environments. It is the grade of stainless steel to be specified in any seaside application.
$108.25 - $597.10
-
Trim Head Deck-Drive™ DWP Wood Screw, 305 Stainless Steel
Trim Head, T15 star drive Box thread reduces required driving torque by 35% Perfect for decks, finishing, millwork and trim Sharp point specially designed to easily penetrate hardwoods
$45.15 - $440.80
-
Deckwise Ipe Seal, 1 Quart
Ipe Seal® creates a bond that extends the life of each deck board by preventing end checking & splitting Wax emulsion sealant protects the end cuts on hardwood decking Coverage is approximately 500 square feet per quart It is recommended to apply sealer to the exposed end grain within 24hrs of cutting the wood
$24.64
-
Wire Lath Modified Truss Head Screw, 305 Stainless Steel
305 Stainless Steel Type 17 point #2 Phillips Drive Wire-lath truss screw for fastening lath to wood
$12.20 - $176.15
-
U2 Fasteners Construction Screw, Carbon Steel, U-Gold
The Construction screw does the job of a lag screw. This code-compliant heavy-duty self-tapping structural fastener is versatile and great for a variety of uses. Dome Head provides an extra-large bearing surface under the head. Tapper Point enables easy piercing and relives strain on material while installing. Tight Star Recess system is specially designed to hold U2 bits firmly in place. They won't slip, even when upside down, allowing these screws to be installed with one hand. Talon Grip nibs secure screw fastening to prevent loosening over time. Reamer Thread enlarges the hole in the material to create a larger passage when drawing materials together and reduces tension on the screw head. The perfect fastener for staircases, deck frames, ledger boards, joists, rafters, planters, play sets and more.
$40.58 - $206.75
-
NailPro® NPCT-3112 0° Strip Ballistic Pin Tool
This tool is a more powerful version of the popular NPCT-3040 tool. Both tools fire “0” degree strip ballistic pins up to .100” diameter however. With the “Power Boost” sleeve accessory the NPCT-3112 is a great choice to penetrate harder substrates such as 5,000 psi concrete. Typical Applications Fastenings to block & steel framing Hat cap channel, drywall channel, fiber cement siding, exterior gypsum board, insulation board, furring strips, water proofing membrane plastic & metal stucco mesh (with optional attachments and washers) plus vertical stone applications. Attach directly to commercial gauge steel studs, concrete block and concrete Specifications Air operated ballistic pin tool Dial-A-Depth adjustment Sequential fire Drives 1/2" to 1-1/2” hardened round head strip ballistic pins Optional accessories include stucco washer nose attachments Load capacity 32 strip ballistic pins Operating pressure 70 to 120 psi (may be used up to 150 psi) Does not qualify for free shipping
$401.45
-
Pro Plug System for AZEK Trim, Stainless Steel Kit
Manufactured by Starborn Industries The PRO PLUG® System for PVC is the superior plugging system for PVC decking & trim! It combines screw down strength with the beauty of a hidden fastener system. Install in 2 easy steps! Set the screw with the PRO PLUG PVC Tool and tap in the PVC plug with a hammer. PRO PLUG PVC Plugs are made from the original PVC material so they are a perfect match for your PVC trim PRO PLUG PVC Tool drives fasteners to the correct depth every time. No Cam-Out Auto Stop™ prevents screw recess from stripping. Available in Stainless Steel or Epoxy Coated Carbon Steel The 50 lin ft kit includes: (75) #10 x 2-1/2" Stainless Steel Screws and (85) plugs The 250 linear ft kit includes: (375) #10 x 2-1/2" Stainless Steel Screws and (400) plugs and Pro Plug Tool for PVC The 750 linear ft kit includes: (1125) #10 x 2-1/2" Stainless Steel Screws and (1200) plugs and Pro Plug Tool for PVC The Pro Plug Tool is needed for installation and is not included in the 50 lin ft kit.
$67.30 - $674.75
-
1/2"-13 Carriage Bolt, Stainless Steel
Type 18-8 & 316 Stainless Steel Hard to find long lengths Length is measured from under head to tip of screw Threaded portion is variable depending on length of bolt Be sure to use anti-seize compound or lubricant like WD-40 to prevent thread seizing.
$1.62 - $21.79
-
0° Strip, T Head, Smooth, Ballistic Pins, Galvanized Steel
Attach wood and metal nailing strips & most trim materials to concrete, concrete block and commercial steel stud Electro Galvanized hardened Steel T Head Straight Strip See specs below for more details and gun compatibility
$31.00 - $98.00
-
NailPro® NPCT-3040 magnetic attachment for 1" metal washers
Fits NailPro® NPCT-3040 & NPCT-3112 air tools
$92.75
-
5/8"-11 Hex Cap Screw, Stainless Steel
Type 18-8 & 316 Stainless Steel Choose from 4 diameters Hard to find long lengths Length is measured from under head to tip of screw Be sure to use anti-seize compound or lubricant like WD-40 to prevent thread seizing.
$3.12 - $19.30
-
Fiber Cement Siding Nails
Type 316 Stainless Steel Annular thread, checkered head Produced expressly for siding materials made of fiber cement composites AISI Type 316 stainless provides the ultimate in corrosion protection Extra sharp diamond point for optimum driving Made in USA AISI Grade 316 Stainless Steel has a lower carbon content than 305 or 302HQ and contains molybdenum for superior corrosion resistance in salt water and other highly corrosive environments. It is the grade of stainless steel to be specified in any seaside application to prevent rusting & bleeding through finishes.
$22.05 - $438.55
-
Wire-Lath Modified Self-Drill Truss Head Screw for Metal, 410SS
Hardened 410 Stainless Steel #2 drill point Phillips drive Low Profile flat truss head Xylan coating provides additional corrosion resistance
$111.35 - $867.80
-
Simpson MSTA18SS Medium Strap Tie, 18 Gauge, Stainless Steel
Made in the USA Straight straps are used to transfer tension loads in a wide variety of applications Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners
$14.80
-
Simpson A34SS Framing Angle (Anchor) - Stainless Steel
This framing angle designed to be used in various connections. Made in the USA Features a speed prong to easily hold connector in place while fastening with nails or SD screws Install with specified stainless steel fasteners
$4.70
-
Star Recess Driver Bits
1" Insert Bits - A compact bit for use in wire detent chucks and drywall style guns 2" Power Bits - A ball detent style bit for use in standard and "quick release" chucks Buy 3 and Save 25% over single bit price!!
$1.50 - $2.95
-
Cap-Tor xd Composite Deck Screws, #10 x 2-1/2", 1050pc Box, 316 Stainless Steel
For Composite & Capstock Decking Type 316 Stainless Steel for the Ultimate in corrosion resistance Salt Water Safe Extra deep T-20 star recess to minimize "wobble" at screw starting Undercut head design - a specially engineered head that cleanly penetrates the hard outer coating of capstock products Transverse™ Threading eliminates "mushroom" effect common to composite decking installed using standard deck screws. Auger Point for faster, easier entry. Helps prevent splitting Available in 10 colors to blend with a wide range of composite deck board colors Use the Deck Matcher to find the best color. For a uniform look, install using the Smart-Bit Depth Setter
$526.50
-
Deckwise Cleaner, Part 1, 16oz
Deck & Wood Cleaner Part 1, 16 oz Cleans outdoor/exterior wood by removing dirt & natural graying in preparation for oiling or finish staining. Cleaning and brightening is recommended at least once a year for maintenance and restoration Perfect for preparing deck boards for Ipe Oil™ Hardwood Deck Finish Biodegradable
$17.95
-
Pro Plug System for Royal Trim, 50 Lin Ft, Epoxy Kit
The PRO PLUG® System for Royal is the superior plugging system for trim! It combines screw down strength with the beauty of a hidden fastener system. Install in 2 easy steps! Set the screw with the PRO PLUG PVC Tool and tap in the Royal plug with a hammer. This 50 linear ft kit includes: (75) #10 x 2-3/4" Epoxy Coated Steel Screws (85) plugs The Pro Plug Tool is needed for installation and is not included in the kit. Add it on.
$39.15
-
Pro Plug System for AZEK Trim, Epoxy Kit
Manufactured by Starborn Industries The PRO PLUG® System is the superior plugging system for PVC decking & trim! It combines screw down strength with the beauty of a hidden fastener system. Install in 2 easy steps! Set the screw with the PRO PLUG PVC Tool and tap in the plug with a hammer. The 50 linear ft kit includes: (75) #10 x 2-3/4" Epoxy Coated Steel Screws and (85) plugs The 250 linear ft kit includes: (375) #10 x 2-3/4" Epoxy Coated Steel Screws and (400) plugs and Pro Plug Tool for PVC The 750 linear ft kit includes: (1125) #10 x 2-3/4" Epoxy Coated Steel Screws and (1200) plugs and Pro Plug Tool for PVC The Pro Plug Tool is needed for installation and is not included in 50 lin ft the kit. Add it on. The PRO PLUG® System for PVC is the superior plugging system for PVC decking & trim! It combines screw down strength with the beauty of a hidden fastener system. Install in 2 easy steps! Set the screw with the PRO PLUG PVC Tool and tap in the PVC plug with a hammer. PRO PLUG PVC Plugs are made from the original PVC material so they are a perfect match for your PVC trim PRO PLUG PVC Tool drives fasteners to the correct depth every time. No Cam-Out Auto Stop™ prevents screw recess from stripping. Available in Stainless Steel or Epoxy Coated Carbon Steel
$39.15 - $432.50
-
Pro Plug System for Kleer Trim, 400 Plugs
The Pro Plug System for use with Kleer® trim contains 400 plugs for 250 lin ft. Depending on the package type selection above, the Pro Plug ® PVC Tool may be included.Add your screws from the choices below or order just the plugs! PRO PLUG® for PVC is a superior plugging system for PVC decking & trim. It combines screw down strength with the beauty of a hidden fastener system Install in 2 easy steps...Set the screw with the PRO PLUG PVC Tool and tap in the PVC plug with a hammer. PRO PLUG® PVC Plugs are made from the Kleer Trim board so they are a perfect match! The PRO PLUG® PVC Tool drives fasteners to the correct depth every time. Its No Cam-Out Auto Stop™ prevents screw recess from stripping.
$52.00
-
Common Nails, Smooth Shank, 304 Stainless Steel
Type 304 Diamond point Available in AISI type 304 stainless steel Made in USA
$12.70 - $520.00
-
Simpson LUS Double 2 x 10 Face Mount Joist Hanger - Stainless Steel
Made in the USA with Type 316 (low Carbon) Stainless Steel 316 stainless provides the highest salt water corrosion resistance of the 316 types. Appropriate for marine and seaside applications and in other severe conditions where corrosion is a concern Must be installed with specified stainless steel fasteners Patented double shear nailing distributes the load through 2 points on each joist for greater strength. The nails slant through the joist into the header, not only fastening the hanger but also helping to carry some of the load. The hanger design allows for the use of fewer fasteners for faster installation Install with specified stainless steel fasteners Full length 3” or 3-1/2” hand drive nails (or 2-1/2” collated connector nails) are always required for the patented double sheer (angled) nailing. Under some conditions alternative sized fasteners may be substituted but at a potentially significant load reduction. See nail substitution chart. LUS series hangers are not intended for welded applications Caution! - Do not bend or remove tabs or alter hanger in any way
$24.30
-
Headcote Trim Head #7 x 1-5/8" Screws, 1050pc Box, 305SS
Stainless Steel Screws with Color Coated Heads For Hardwood, Cedar, Redwood and Pressure Treated Decking Headcote screws are designed to work with Smart-Bit® Predrilling and Countersinking Tools, for a perfect finish. To find your perfect color match, use the interactive Deck Matcher Tool.
$265.65
You have seen 144 out of 302 products
