Free shipping on online orders over $199. Exclusions apply, click for details

Description

  • Made in the USA with Type 316 (low Carbon) Stainless Steel
  • 316 stainless provides the highest salt water corrosion resistance of the 316 types. Appropriate for marine and seaside applications and in other severe conditions where corrosion is a concern 
  • Must be installed with specified stainless steel fasteners
  • Patented double shear nailing distributes the load through 2 points on each joist for greater strength. The nails slant through the joist into the header, not only fastening the hanger but also helping to carry some of the load.
  • The hanger design allows for the use of fewer fasteners for faster installation
  • Install with specified stainless steel fasteners
  • Full length 3” or 3-1/2” hand drive nails (or 2-1/2” collated connector nails) are always required for the patented double sheer (angled) nailing. Under some conditions alternative sized fasteners may be substituted but at a potentially significant load reduction. See nail substitution chart.
  • LUS series hangers are not intended for welded applications
  • Caution! - Do not bend or remove tabs or alter hanger in any way

Simpson LUS Single 2 x 8 Face Mount Joist Hanger - Stainless Steel

Product form

SKU: LUS28SS

$15.37

Free pickup in our shop(s)
Volume pricing

Buy 25 for $14.66 each

    You may be interested in these products

    • 34° Connector Joist Hanger Nails, Paper Tape, Stainless Steel
    • Connector Nail for Stainless Steel Connectors and Joist Hangers, 1-1/2"

      Joist Hanger / Framing Connector Nails, 316SS

      $29.60

    • Strong Drive SD Connector Screw, 1-1/2", 100 pc Box, 316SS; Strong-Drive SD Connector Screw, 1-1/2", 316 Stainless Steel; SD Connector Screw, 1-1/2" Screw, front view with head stamp visible; Installation photo using the 1-1/2" SD Connector screw with the H2.5ASS Hurricane Tie. Install is on a beachfront, coastal property. Stainless Steel will offer corrosion protection in this environment.

      SD Connector Screw 316SS

      $54.80

    4.8 Rating 12,000+ Reviews on Shopper Approved

    High Quality Personalized Service

    Fast Shipping FedEx and USPS

    Free Shipping on orders over $199*

    Wide Variety of Hard-to-find Stainless Steel Fasteners

    Description

    • Made in the USA with Type 316 (low Carbon) Stainless Steel
    • 316 stainless provides the highest salt water corrosion resistance of the 316 types. Appropriate for marine and seaside applications and in other severe conditions where corrosion is a concern 
    • Must be installed with specified stainless steel fasteners
    • Patented double shear nailing distributes the load through 2 points on each joist for greater strength. The nails slant through the joist into the header, not only fastening the hanger but also helping to carry some of the load.
    • The hanger design allows for the use of fewer fasteners for faster installation
    • Install with specified stainless steel fasteners
    • Full length 3” or 3-1/2” hand drive nails (or 2-1/2” collated connector nails) are always required for the patented double sheer (angled) nailing. Under some conditions alternative sized fasteners may be substituted but at a potentially significant load reduction. See nail substitution chart.
    • LUS series hangers are not intended for welded applications
    • Caution! - Do not bend or remove tabs or alter hanger in any way

    Specifications
    Base
    1-3/4"
    Gauge
    18
    Hanger inside width
    1-9/16"
    Height
    6-5/8"
    Joist size
    Single 2 x 8
    Manufacturer
    Simpson Strong Tie®
    Material
    Type 316 Stainless Steel
    Mfg sku
    LUS28SS
    Sold as
    per piece
    Use for
    Salt water exposure and treated lumber

    Specified Fasteners

    Hand Drive Nails

    Double 2X
    (10) 3" x 0.148" Nails (SSA10D)
    Single 2X
    (6) 1-1/2" x 0.148" nails* for Header (SSNA10) + (4) 3" x 0.148 for Joist (SSA10D)
    **NOTE
    Using 1-1/2" hand nails for header connection significantly reduces hanger load capacity. See Load Adjustment Chart

    Collated (Strip) Nails

    Double 2X: Header (Flange & Joist):
    (10) 2-1/2" x 0.148" connector nails
    Single 2X: Header (Flange):
    (6) 1-1/2" x 0.148" connector nails* for header + (4) 2-1/2" x 0.148" connector nails for joist
    Note:
    Minimum fastener length for LUS joist hanger angled fastening (double shear) is 2-1/2".

    #9 SD Stainless Connector Screws

    Double 2X: Header (Flange & Joist):
    (10) 2-1/2" #9 SD screws
    Single 2X: Header (Flange):
    (4) 1-1/2" SD Screws for Header + (4) 2-1/2" #9 SD screws for Joist, Nails and SD Screws may NOT be Combined in a connection. See Load Adustment Chart for complete fastener information.

    Videos

    Reviews & Q&A

    Customer Reviews

    Based on 2 reviews
    100%
    (2)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    T
    Tom Holland
    Great service

    Great service, quality and prices

    D
    Dennis Stoecklin

    This was the perfect product for reinforcing deck floor joists. The property is near the ocean and the stainless steel product was necessary due to the harsh salt air environment.

    Recently viewed products

    • <h2>GET HELP CHOOSING YOUR DECK FASTENERS!</h2>

      GET HELP CHOOSING YOUR DECK FASTENERS!

      We'll find you the right fasteners and estimate how many you need for your deck

      Start Here

    • Personalized service
    • Fast shipping
    • Wide variety of hard to find stainless steel fasteners

    © 2026 Manasquan Fasteners, Powered by Shopify

      Login

      Forgot your password?

      Don't have an account yet?
      Create account