Free Shipping on online orders over $199* See details. Some restrictions apply

Joist Hangers

Filter

Explore our wide selection of Simpson joist hangers, trusted for both residential and commercial applications. These connectors are designed to provide strong, reliable support at beam-to-joist connections. They’re especially ideal for outdoor structures like decks, pergolas, and porches, where long-term durability is critical.

Compatible with dimensional lumber and engineered wood, our joist hangers deliver long-term durability, even in high-moisture or coastal environments. With our complete line of Simpson Strong-Tie connectors, brackets, and ties, you can maintain structural integrity across every project.

Read more

  • LUS26SS Single 2 x 6 Face Mount Joist Hanger, Stainless Steel; LUS26SS Installed with Strong Drive SD Connector Screw; Double Shear Nailing, top view. The nail is installed into the joist and header, distributing the load through two points on each joist nail for greater strength

    Simpson LUS Single 2 x 6 Face Mount Joist Hanger - Stainless Steel

    Made in the USA with Type 316 (low Carbon) Stainless Steel 316 stainless provides the highest salt water corrosion resistance of the 316 types. Appropriate for marine and seaside applications and in other severe conditions where corrosion is a concern  Must be installed with specified stainless steel fasteners Patented double shear nailing distributes the load through 2 points on each joist for greater strength. The nails slant through the joist into the header, not only fastening the hanger but also helping to carry some of the load. The hanger design allows for the use of fewer fasteners for faster installation Install with specified stainless steel fasteners Full length 3” or 3-1/2” hand drive nails (or 2-1/2” collated connector nails) are always required for the patented double sheer (angled) nailing. Under some conditions alternative sized fasteners may be substituted but at a potentially significant load reduction. See nail substitution chart. LUS series hangers are not intended for welded applications Caution! - Do not bend or remove tabs or alter hanger in any way

    Read more

    $12.15

  • LUS26-2SS Double 2 x 6 Face Mount Joist Hanger; LUS26-2 Installed with nails; Double Shear Nailing, top view. The nail is installed into the joist and header, distributing the load through two points on each joist nail for greater strength

    Simpson LUS Double 2 x 6 Face Mount Joist Hanger - Stainless Steel

    1 review

    Made in the USA with Type 316 (low Carbon) Stainless Steel 316 stainless provides the highest salt water corrosion resistance of the 316 types. Appropriate for marine and seaside applications and in other severe conditions where corrosion is a concern  Must be installed with specified stainless steel fasteners Patented double shear nailing distributes the load through 2 points on each joist for greater strength. The nails slant through the joist into the header, not only fastening the hanger but also helping to carry some of the load. The hanger design allows for the use of fewer fasteners for faster installation Install with specified stainless steel fasteners Full length 3” or 3-1/2” hand drive nails (or 2-1/2” collated connector nails) are always required for the patented double sheer (angled) nailing. Under some conditions alternative sized fasteners may be substituted but at a potentially significant load reduction. See nail substitution chart. LUS series hangers are not intended for welded applications Caution! - Do not bend or remove tabs or alter hanger in any way

    Read more

    $17.40

  • LUS28SS Single 2 x 8 Face Mount Joist Hanger, Stainless Steel; LUS28 Installed with nails. Use 0.148 x 3" (10d common) or 0.148 x 3 1⁄4" (16d sinker) nail; Double Shear Nailing, top view. The nail is installed into the joist and header, distributing the load through two points on each joist nail for greater strength

    Simpson LUS Single 2 x 8 Face Mount Joist Hanger - Stainless Steel

    2 reviews

    Made in the USA with Type 316 (low Carbon) Stainless Steel 316 stainless provides the highest salt water corrosion resistance of the 316 types. Appropriate for marine and seaside applications and in other severe conditions where corrosion is a concern  Must be installed with specified stainless steel fasteners Patented double shear nailing distributes the load through 2 points on each joist for greater strength. The nails slant through the joist into the header, not only fastening the hanger but also helping to carry some of the load. The hanger design allows for the use of fewer fasteners for faster installation Install with specified stainless steel fasteners Full length 3” or 3-1/2” hand drive nails (or 2-1/2” collated connector nails) are always required for the patented double sheer (angled) nailing. Under some conditions alternative sized fasteners may be substituted but at a potentially significant load reduction. See nail substitution chart. LUS series hangers are not intended for welded applications Caution! - Do not bend or remove tabs or alter hanger in any way

    Read more

    $15.37

  • LUS28-2 Double 2 x 8 Face Mount Joist Hanger, Stainless Steel; LUS28-2 installed with nails; Double Shear Nailing, top view. The nail is installed into the joist and header, distributing the load through two points on each joist nail for greater strength

    Simpson LUS Double 2 x 8 Face Mount Joist Hanger - Stainless Steel

    Made in the USA with Type 316 (low Carbon) Stainless Steel 316 stainless provides the highest salt water corrosion resistance of the 316 types. Appropriate for marine and seaside applications and in other severe conditions where corrosion is a concern  Must be installed with specified stainless steel fasteners Patented double shear nailing distributes the load through 2 points on each joist for greater strength. The nails slant through the joist into the header, not only fastening the hanger but also helping to carry some of the load. The hanger design allows for the use of fewer fasteners for faster installation Install with specified stainless steel fasteners Full length 3” or 3-1/2” hand drive nails (or 2-1/2” collated connector nails) are always required for the patented double sheer (angled) nailing. Under some conditions alternative sized fasteners may be substituted but at a potentially significant load reduction. See nail substitution chart. LUS series hangers are not intended for welded applications Caution! - Do not bend or remove tabs or alter hanger in any way

    Read more

    $20.55

  • LUS210 Single 2 x 10 Face Mount Joist Hanger, Stainless Steel; LUS210 Installed with nails, installation illustration; Double Shear Nailing, top view. The nail is installed into the joist and header, distributing the load through two points on each joist nail for greater strength

    Simpson LUS Single 2 x 10 Face Mount Joist Hanger - Stainless Steel

    1 review

    Made in the USA with Type 316 (low Carbon) Stainless Steel 316 stainless provides the highest salt water corrosion resistance of the 316 types. Appropriate for marine and seaside applications and in other severe conditions where corrosion is a concern  Must be installed with specified stainless steel fasteners Patented double shear nailing distributes the load through 2 points on each joist for greater strength. The nails slant through the joist into the header, not only fastening the hanger but also helping to carry some of the load. The hanger design allows for the use of fewer fasteners for faster installation Install with specified stainless steel fasteners Full length 3” or 3-1/2” hand drive nails (or 2-1/2” collated connector nails) are always required for the patented double sheer (angled) nailing. Under some conditions alternative sized fasteners may be substituted but at a potentially significant load reduction. See nail substitution chart. LUS series hangers are not intended for welded applications Caution! - Do not bend or remove tabs or alter hanger in any way

    Read more

    $19.25

  • LUS210-2 Double 2 x 10 Face Mount Joist Hanger, Stainless Steel; LUS210-2 Installed with nails, installation drawing; Double Shear Nailing, top view. The nail is installed into the joist and header, distributing the load through two points on each joist nail for greater strength

    Simpson LUS Double 2 x 10 Face Mount Joist Hanger - Stainless Steel

    Made in the USA with Type 316 (low Carbon) Stainless Steel 316 stainless provides the highest salt water corrosion resistance of the 316 types. Appropriate for marine and seaside applications and in other severe conditions where corrosion is a concern  Must be installed with specified stainless steel fasteners Patented double shear nailing distributes the load through 2 points on each joist for greater strength. The nails slant through the joist into the header, not only fastening the hanger but also helping to carry some of the load. The hanger design allows for the use of fewer fasteners for faster installation Install with specified stainless steel fasteners Full length 3” or 3-1/2” hand drive nails (or 2-1/2” collated connector nails) are always required for the patented double sheer (angled) nailing. Under some conditions alternative sized fasteners may be substituted but at a potentially significant load reduction. See nail substitution chart. LUS series hangers are not intended for welded applications Caution! - Do not bend or remove tabs or alter hanger in any way

    Read more

    $24.30

  • LUC26 2 x 6 Concealed Flange Joist Hanger, Stainless Steel; LUC26SS 2x6 Concealed Joist Hanger Installation using Stainless Steel Strong Drive SD Connector Screws

    Simpson LUC Single 2 x 6 Concealed Flange Joist Hanger - Stainless Steel

    1 review

    Ideal for sight exposed connections and end of ledger/rim joist installations Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners Under certain conditions, alternative size nails or Simpson SD screws may be substituted. Note that it may significantly alter load capacity. See the nail substitution chart. Caution! - Do not bend or remove tabs or alter hanger in any way

    Read more

    $34.15

  • LUC210 2 x 10 Concealed Flange Joist Hanger, Stainless Steel; LUC210 Single 2 x 10 Concealed Flange Joist Hanger, Stainless Steel, installed

    Simpson LUC Single 2 x 10 Concealed Flange Joist Hanger - Stainless Steel

    Ideal for sight exposed connections and end of ledger/rim joist installations Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners Under certain conditions, alternative size nails or Simpson SD screws may be substituted. Note that it may significantly alter load capacity. See the nail substitution chart. Caution! - Do not bend or remove tabs or alter hanger in any way

    Read more

    $37.50

  • HUC210-2SS Double 2 x 10 Concealed Flange Joist Hanger, Stainless Steel

    Simpson HUC Double 2 x 10 Concealed Flange Joist Hanger - Stainless Steel

    Ideal for sight exposed connections and end of ledger/rim joist installations Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners Under certain conditions, alternative size nails or Simpson SD screws may be substituted. Note that it may significantly alter load capacity. See the nail substitution chart. Caution! - Do not bend or remove tabs or alter hanger in any way

    Read more

    $75.50

  • HUC28-2SS Double 2 x 8 Concealed Flange Joist Hanger, Stainless Steel, installed

    Simpson HUC Double 2 x 8 Concealed Flange Joist Hanger - Stainless Steel

    Ideal for sight exposed connections and end of ledger/rim joist installations Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners Under certain conditions, alternative size nails or Simpson SD screws may be substituted. Note that it may significantly alter load capacity. See the nail substitution chart. Caution! - Do not bend or remove tabs or alter hanger in any way

    Read more

    $68.50

  • SUL24SS 2 x 4 Skewed Left 45° Joist Hanger, Stainless Steel; SUL Left Skewed Joist Hanger, Installed

    Simpson SUL Single 2 x 4 Skewed Left 45° Joist Hanger - Stainless Steel

    The SU series of hangers are skewed 45° left or right. Angled nail slots direct nails for proper placement. These hangers will normally accommodate a 40° - 50° skew. The letter "L" in the code designates left skew. The letter "R" designates right skew. Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance Features several configurations for wind and seismic resistance ties for trusses and rafters. Install with specified stainless steel fasteners

    Read more

    $38.85

  • SUL26SS 2 x 6 Skewed Left 45° Joist Hanger, Stainless Steel; SUL Left Skewed Joist Hanger, Installed

    Simpson SUL Single 2 x 6 Skewed Left 45° Joist Hanger - Stainless Steel

    The SU series of hangers are skewed 45° left or right. Angled nail slots direct nails for proper placement. These hangers will normally accommodate a 40° - 50° skew. The letter "L" in the code designates left skew. The letter "R" designates right skew. Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance Features several configurations for wind and seismic resistance ties for trusses and rafters. Install with specified stainless steel fasteners

    Read more

    $46.15

  • SUR210SS 2 x 10 Skewed Right 45° Joist Hanger, Stainless Steel; SUR Right Skewed Joist Hanger, Installed

    Simpson SUR Single 2 x 10 Skewed Right 45° Joist Hanger - Stainless Steel

    The SU series of hangers are skewed 45° left or right. Angled nail slots direct nails for proper placement. These hangers will normally accommodate a 40° - 50° skew. The letter "L" in the code designates left skew. The letter "R" designates right skew. Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance Features several configurations for wind and seismic resistance ties for trusses and rafters. Install with specified stainless steel fasteners

    Read more

    $48.00

  • SUR24SS 2 x 4 Skewed Right 45° Joist Hanger, Stainless Steel; SUR Right Skewed Joist Hanger, Installed

    Simpson SUR Single 2 x 4 Skewed Right 45° Joist Hanger - Stainless Steel

    The SU series of hangers are skewed 45° left or right. Angled nail slots direct nails for proper placement. These hangers will normally accommodate a 40° - 50° skew. The letter "L" in the code designates left skew. The letter "R" designates right skew. Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance Features several configurations for wind and seismic resistance ties for trusses and rafters. Install with specified stainless steel fasteners

    Read more

    $38.85

  • SUR26SS 2 x 6 Skewed Right 45° Joist Hanger, Stainless Steel; SUR Right Skewed Joist Hanger, Installed

    Simpson SUR Single 2 x 6 Skewed Right 45° Joist Hanger - Stainless Steel

    The SU series of hangers are skewed 45° left or right. Angled nail slots direct nails for proper placement. These hangers will normally accommodate a 40° - 50° skew. The letter "L" in the code designates left skew. The letter "R" designates right skew. Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance Features several configurations for wind and seismic resistance ties for trusses and rafters. Install with specified stainless steel fasteners

    Read more

    $46.15

  • SUL210SS 2 x 10 Skewed Left 45° Joist Hanger, Stainless Steel; SUL Left Skewed Joist Hanger, Installed

    Simpson SUL Single 2 x 10 Skewed Left 45° Joist Hanger - Stainless Steel

    The SU series of hangers are skewed 45° left or right. Angled nail slots direct nails for proper placement. These hangers will normally accommodate a 40° - 50° skew. The letter "L" in the code designates left skew. The letter "R" designates right skew. Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance Features several configurations for wind and seismic resistance ties for trusses and rafters. Install with specified stainless steel fasteners

    Read more

    $48.00

Simpson Joist Hangers for Decks and Framing Projects

Designed to securely anchor joists to beams, rim joists, or ledgers, Simpson stainless steel joist hangers are ideal for deck construction, subfloor framing, and heavy-duty load applications. They’re also available in multiple configurations, including:

  • Face mount
  • Top flange
  • Skewed
  • Sloped 
  • Concealed-flange

Our stainless steel joist hangers are appropriate for coastal or high-moisture environments, which resist corrosion and support longer lifespans. Plus, when installed with specified fasteners, joist hangers meet or exceed building code requirements.

Why Choose Simpson Strong-Tie Connectors?

  • Simpson Strong-Tie has been a trusted name in structural hardware for over 60 years.
  • Engineered for precision load distribution, high uplift resistance, and code compliance
  • Ideal for contractors, framers, and deck builders who demand strength and consistency
  • Backed by third-party testing and industry certifications

Why Shop With Manasquan Fasteners?

At Manasquan Fasteners, we make it easy to get the right hardware for every job. We offer a comprehensive selection of Simpson joist hangers and other connectors alongside stainless steel screws, nails, and deck fasteners. All orders are shipped fast across the United States.

Our commitment to quality, fast shipping, and competitive pricing ensures you can complete projects confidently and efficiently with no unwanted surprises.

Explore our decking and structural hardware collections, featuring hidden fasteners and connectors, to find everything you need to build lasting outdoor and indoor structures with confidence.

Build It Right With Structural Connectors That Last

Whether you’re constructing a backyard deck or a multi-level platform, choose Simpson joist hangers designed for strength and code compliance. Shop our collection of joist hangers for decks, stainless steel hangers, and Simpson Strong-Tie connectors. Contact our experts today!

  • <h2>GET HELP CHOOSING YOUR DECK FASTENERS!</h2>

    GET HELP CHOOSING YOUR DECK FASTENERS!

    We'll find you the right fasteners and estimate how many you need for your deck

    Start Here

  • Personalized service
  • Fast shipping
  • Wide variety of hard to find stainless steel fasteners

© 2025 Manasquan Fasteners, Powered by Shopify

    Login

    Forgot your password?

    Don't have an account yet?
    Create account