Simpson Connectors
-
Simpson LUS Single 2 x 8 Face Mount Joist Hanger - Stainless Steel
Made in the USA with Type 316 (low Carbon) Stainless Steel 316 stainless provides the highest salt water corrosion resistance of the 316 types. Appropriate for marine and seaside applications and in other severe conditions where corrosion is a concern Must be installed with specified stainless steel fasteners Patented double shear nailing distributes the load through 2 points on each joist for greater strength. The nails slant through the joist into the header, not only fastening the hanger but also helping to carry some of the load. The hanger design allows for the use of fewer fasteners for faster installation Install with specified stainless steel fasteners Full length 3” or 3-1/2” hand drive nails (or 2-1/2” collated connector nails) are always required for the patented double sheer (angled) nailing. Under some conditions alternative sized fasteners may be substituted but at a potentially significant load reduction. See nail substitution chart. LUS series hangers are not intended for welded applications Caution! - Do not bend or remove tabs or alter hanger in any way
$14.55
-
Simpson LUC Single 2 x 6 Concealed Flange Joist Hanger - Stainless Steel
Ideal for sight exposed connections and end of ledger/rim joist installations Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners Under certain conditions, alternative size nails or Simpson SD screws may be substituted. Note that it may significantly alter load capacity. See the nail substitution chart. Caution! - Do not bend or remove tabs or alter hanger in any way
$37.60
-
Simpson LUS Single 2 x 10 Face Mount Joist Hanger - Stainless Steel
Made in the USA with Type 316 (low Carbon) Stainless Steel 316 stainless provides the highest salt water corrosion resistance of the 316 types. Appropriate for marine and seaside applications and in other severe conditions where corrosion is a concern Must be installed with specified stainless steel fasteners Patented double shear nailing distributes the load through 2 points on each joist for greater strength. The nails slant through the joist into the header, not only fastening the hanger but also helping to carry some of the load. The hanger design allows for the use of fewer fasteners for faster installation Install with specified stainless steel fasteners Full length 3” or 3-1/2” hand drive nails (or 2-1/2” collated connector nails) are always required for the patented double sheer (angled) nailing. Under some conditions alternative sized fasteners may be substituted but at a potentially significant load reduction. See nail substitution chart. LUS series hangers are not intended for welded applications Caution! - Do not bend or remove tabs or alter hanger in any way
$18.25
-
Simpson LUC Single 2 x 10 Concealed Flange Joist Hanger - Stainless Steel
Ideal for sight exposed connections and end of ledger/rim joist installations Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners Under certain conditions, alternative size nails or Simpson SD screws may be substituted. Note that it may significantly alter load capacity. See the nail substitution chart. Caution! - Do not bend or remove tabs or alter hanger in any way
$41.10
-
Simpson MSTA36SS Medium Strap Tie, 18 Gauge, Stainless Steel
Made in the USA Straight straps are used to transfer tension loads in a wide variety of applications Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners
$49.50
-
Simpson AC4SS 4 x 4 Adjustable Post Cap (pair Left & Right) - Stainless Steel
T connection. Provides connection between a beam and a post with one cap- no need for left and right pieces. Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners
$61.20
-
Simpson AC6SS 6 x 6 Adjustable Post Cap (pair Left & Right) - Stainless Steel
T connection. Provides connection between a beam and a post with one cap- no need for left and right pieces. Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners
$87.45
-
Simpson LCE4SS Light Post Cap (pair Left & Right) - Stainless Steel
For end cap connection, providing connection between the end of beam and a post. Provides maximum versatility. May be used for various size member(beam) and end post size connections Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners
$60.75
-
Simpson H2ASS Hurricane Tie, 18 Gauge, Stainless Steel
Made in the USA Features several configurations for wind and seismic resistant ties for trusses and rafters Replaces the H2SS Type 316L Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners
$11.00
-
Simpson H2.5ASS Hurricane Tie, 18 Gauge, Stainless Steel
Made in the USA Features several configurations for wind and seismic resistant ties for trusses and rafters Replaces the H2.5SS Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners
$4.50
-
Simpson H3SS Hurricane Tie (Pair L&R), 18 Gauge, Stainless Steel
Made in the USA Features several configurations for wind and seismic resistant ties for trusses and rafters Sold in pairs, right and left Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners
$8.95
-
Simpson H8SS Hurricane Tie, 18 Gauge, Stainless Steel
Made in the USA Features several configurations for wind and seismic resistant ties for trusses and rafters Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners Approved for installation with SD Connector Screws
$13.05
-
Simpson H10ASS Hurricane Tie, 18 Gauge, Stainless Steel
Made in the USA Features several configurations for wind and seismic resistant ties for trusses and rafters Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners
$19.85
-
Simpson MSTA12SS Medium Strap Tie, 18 Gauge, Stainless Steel
Made in the USA Straight straps are used to transfer tension loads in a wide variety of applications Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners
$10.80
-
Simpson MSTA18SS Medium Strap Tie, 18 Gauge, Stainless Steel
Made in the USA Straight straps are used to transfer tension loads in a wide variety of applications Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners
$14.80
-
Simpson MSTA24SS Medium Strap Tie, 18 Gauge, Stainless Steel
Made in the USA Straight straps are used to transfer tension loads in a wide variety of applications Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners
$23.20
-
Simpson ACE4SS 4 x 4 Post End Cap (pair Left & Right) - Stainless Steel
For end cap connection, providing connection between a beam and a post. Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance Sold in pairs Install with specified stainless steel fasteners
$40.70
-
Simpson LTS12SS, 20" Light Twist Strap, 18 Gauge, Stainless Steel
Made in the USA Twist straps provide tension connections between two wood members Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners
$12.40
-
Simpson LTS18SS, 18" Light Twist Strap, 18 Gauge, Stainless Steel
Made in the USA Twist straps provide tension connections between two wood members Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners
$19.00
-
Simpson MTS12SS, 12" Medium Twist Strap, 16 Gauge, Stainless Steel
Made in the USA Twist straps provide tension connections between two wood members Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners
$11.90
-
Simpson MTS20SS, 20" Medium Twist Strap, 16 Gauge, Stainless Steel
Made in the USA Twist straps provide tension connections between two wood members Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners
$26.70
-
Simpson TA9SS Staircase Angle, 9", 12 Gauge, Stainless Steel
Made in the USA For use in structurally sound staircase framing Ties the stair tread to the stringer Install one TA angle at each end of stair tread The Simpson Strong-Tie® TA eliminates costly conventional notching Attached to tread & stringer with ¼” x 1-1/2” Stainless Simpson SDS screws Code compliant
$49.78
-
Simpson TA10SS Staircase Angle, 10", 12 Gauge, Stainless Steel
Made in the USA For use in structurally sound staircase framing Ties the stair tread to the stringer Install one TA angle at each end of stair tread The Simpson Strong-Tie® TA eliminates costly conventional notching Attached to tread & stringer with ¼” x 1-1/2” Stainless Simpson SDS screws Install with specified stainless steel fasteners Code compliant
$54.15
-
Simpson LSCSS Adjustable Stair Stringer Connector, 18 Gauge, Stainless Steel
Made in the USA Makes stair-stringer connections fast and easy Type 316 Stainless Steel for the ultimate in corrosion resistance Provides a concealed connection between the stair stringer and the carrying header or rim joist Replaces costly framing & toe-nailing Use for both left and right applications Install with specified stainless steel fasteners
$36.85
-
Simpson DTT2SS Deck Tension Tie, 14 Gauge, with 1.5" Screws, Stainless Steel
Made in the USA Type 316 Stainless Steel for the ultimate in corrosion resistance Can be used for a guardrail to post connection or lateral load connections Install with specified stainless steel fasteners Code compliant
$39.70
-
Simpson DJT14SS Deck Tension Tie, 14 Gauge, Stainless Steel
Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance Deck Tension Tie, designed to attach 2x deck joists to the side of 4x or larger support post It is recommended to install on post first Minimum 2x4 joist and 4x4 post Supplied with 1/4" x 1-1/2" type 316 stainless steel SDS screws
$28.45
-
Simpson CS16SS-R Coil Strap, 16 Gauge, 25 ft Roll, Stainless Steel
Made in the USA Coiled strap is a continuous utility strap. Built to resist tension and uplift. Nail slots provided for easy installation Continuous utility strap can be cut to length on the job site Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners
$277.85
-
4 x 4 Concealed Post Base, 316 Stainless Steel
Ideal for 4x4 posts to be covered with PVC board post wrap systems 1" standoff height above concrete to prevent post rotProvides a clean, concealed lookSatisfies code requirements for posts that are exposed to weather, water splash or in basementsBox includes components to make the post connection in one box, *note anchors not includedContents: Knife Plate, Standoff base, 2 washers and 3 pinsCPT44SS is tested and load rated for uplift, download and lateral load
$207.00
-
Simpson SUR Single 2 x 6 Skewed Right 45° Joist Hanger - Stainless Steel
The SU series of hangers are skewed 45° left or right. Angled nail slots direct nails for proper placement. These hangers will normally accommodate a 40° - 50° skew. The letter "L" in the code designates left skew. The letter "R" designates right skew. Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance Features several configurations for wind and seismic resistance ties for trusses and rafters. Install with specified stainless steel fasteners
$46.15
-
Simpson LUS Double 2 x 6 Face Mount Joist Hanger - Stainless Steel
Made in the USA with Type 316 (low Carbon) Stainless Steel 316 stainless provides the highest salt water corrosion resistance of the 316 types. Appropriate for marine and seaside applications and in other severe conditions where corrosion is a concern Must be installed with specified stainless steel fasteners Patented double shear nailing distributes the load through 2 points on each joist for greater strength. The nails slant through the joist into the header, not only fastening the hanger but also helping to carry some of the load. The hanger design allows for the use of fewer fasteners for faster installation Install with specified stainless steel fasteners Full length 3” or 3-1/2” hand drive nails (or 2-1/2” collated connector nails) are always required for the patented double sheer (angled) nailing. Under some conditions alternative sized fasteners may be substituted but at a potentially significant load reduction. See nail substitution chart. LUS series hangers are not intended for welded applications Caution! - Do not bend or remove tabs or alter hanger in any way
$17.40
-
Simpson LUS Double 2 x 8 Face Mount Joist Hanger - Stainless Steel
Made in the USA with Type 316 (low Carbon) Stainless Steel 316 stainless provides the highest salt water corrosion resistance of the 316 types. Appropriate for marine and seaside applications and in other severe conditions where corrosion is a concern Must be installed with specified stainless steel fasteners Patented double shear nailing distributes the load through 2 points on each joist for greater strength. The nails slant through the joist into the header, not only fastening the hanger but also helping to carry some of the load. The hanger design allows for the use of fewer fasteners for faster installation Install with specified stainless steel fasteners Full length 3” or 3-1/2” hand drive nails (or 2-1/2” collated connector nails) are always required for the patented double sheer (angled) nailing. Under some conditions alternative sized fasteners may be substituted but at a potentially significant load reduction. See nail substitution chart. LUS series hangers are not intended for welded applications Caution! - Do not bend or remove tabs or alter hanger in any way
$20.55
-
Simpson LUS Double 2 x 10 Face Mount Joist Hanger - Stainless Steel
Made in the USA with Type 316 (low Carbon) Stainless Steel 316 stainless provides the highest salt water corrosion resistance of the 316 types. Appropriate for marine and seaside applications and in other severe conditions where corrosion is a concern Must be installed with specified stainless steel fasteners Patented double shear nailing distributes the load through 2 points on each joist for greater strength. The nails slant through the joist into the header, not only fastening the hanger but also helping to carry some of the load. The hanger design allows for the use of fewer fasteners for faster installation Install with specified stainless steel fasteners Full length 3” or 3-1/2” hand drive nails (or 2-1/2” collated connector nails) are always required for the patented double sheer (angled) nailing. Under some conditions alternative sized fasteners may be substituted but at a potentially significant load reduction. See nail substitution chart. LUS series hangers are not intended for welded applications Caution! - Do not bend or remove tabs or alter hanger in any way
$24.30
-
Simpson HUC Double 2 x 8 Concealed Flange Joist Hanger - Stainless Steel
Ideal for sight exposed connections and end of ledger/rim joist installations Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners Under certain conditions, alternative size nails or Simpson SD screws may be substituted. Note that it may significantly alter load capacity. See the nail substitution chart. Caution! - Do not bend or remove tabs or alter hanger in any way
$68.50
-
Simpson HUC Double 2 x 10 Concealed Flange Joist Hanger - Stainless Steel
Ideal for sight exposed connections and end of ledger/rim joist installations Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance Install with specified stainless steel fasteners Under certain conditions, alternative size nails or Simpson SD screws may be substituted. Note that it may significantly alter load capacity. See the nail substitution chart. Caution! - Do not bend or remove tabs or alter hanger in any way
$75.50
-
Simpson SUR Single 2 x 4 Skewed Right 45° Joist Hanger - Stainless Steel
The SU series of hangers are skewed 45° left or right. Angled nail slots direct nails for proper placement. These hangers will normally accommodate a 40° - 50° skew. The letter "L" in the code designates left skew. The letter "R" designates right skew. Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance Features several configurations for wind and seismic resistance ties for trusses and rafters. Install with specified stainless steel fasteners
$38.85
-
Simpson SUL Single 2 x 4 Skewed Left 45° Joist Hanger - Stainless Steel
The SU series of hangers are skewed 45° left or right. Angled nail slots direct nails for proper placement. These hangers will normally accommodate a 40° - 50° skew. The letter "L" in the code designates left skew. The letter "R" designates right skew. Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance Features several configurations for wind and seismic resistance ties for trusses and rafters. Install with specified stainless steel fasteners
$38.85
-
Simpson LUS Single 2 x 6 Face Mount Joist Hanger - Stainless Steel
Made in the USA with Type 316 (low Carbon) Stainless Steel 316 stainless provides the highest salt water corrosion resistance of the 316 types. Appropriate for marine and seaside applications and in other severe conditions where corrosion is a concern Must be installed with specified stainless steel fasteners Patented double shear nailing distributes the load through 2 points on each joist for greater strength. The nails slant through the joist into the header, not only fastening the hanger but also helping to carry some of the load. The hanger design allows for the use of fewer fasteners for faster installation Install with specified stainless steel fasteners Full length 3” or 3-1/2” hand drive nails (or 2-1/2” collated connector nails) are always required for the patented double sheer (angled) nailing. Under some conditions alternative sized fasteners may be substituted but at a potentially significant load reduction. See nail substitution chart. LUS series hangers are not intended for welded applications Caution! - Do not bend or remove tabs or alter hanger in any way
$11.30
-
Simpson SUL Single 2 x 6 Skewed Left 45° Joist Hanger - Stainless Steel
The SU series of hangers are skewed 45° left or right. Angled nail slots direct nails for proper placement. These hangers will normally accommodate a 40° - 50° skew. The letter "L" in the code designates left skew. The letter "R" designates right skew. Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance Features several configurations for wind and seismic resistance ties for trusses and rafters. Install with specified stainless steel fasteners
$46.15
-
Simpson SUR Single 2 x 10 Skewed Right 45° Joist Hanger - Stainless Steel
The SU series of hangers are skewed 45° left or right. Angled nail slots direct nails for proper placement. These hangers will normally accommodate a 40° - 50° skew. The letter "L" in the code designates left skew. The letter "R" designates right skew. Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance Features several configurations for wind and seismic resistance ties for trusses and rafters. Install with specified stainless steel fasteners
$48.00
-
Simpson SUL Single 2 x 10 Skewed Left 45° Joist Hanger - Stainless Steel
The SU series of hangers are skewed 45° left or right. Angled nail slots direct nails for proper placement. These hangers will normally accommodate a 40° - 50° skew. The letter "L" in the code designates left skew. The letter "R" designates right skew. Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance Features several configurations for wind and seismic resistance ties for trusses and rafters. Install with specified stainless steel fasteners
$48.00
-
Simpson A34SS Framing Angle Anchor - Stainless Steel
This framing angle designed to be used in various connections. Made in the USA Features a speed prong to easily hold connector in place while fastening with nails or SD screws Install with specified stainless steel fasteners
$4.70
-
Simpson A35SS 6-Way Framing Angle Anchor - Stainless Steel
Made in the USA Reversable and bendable one time to fit your application Features a speed prong to easily hold connector in place while fastening with nails Install with specified stainless steel fasteners
$5.15
-
Simpson LS50SS Skewable L Angle - Stainless Steel
Made in the USA Reinforcing and adjustable angle Site bendable (one time) from 0° - 130° to fit your application. Used for joist framing where a standard hanger isn’t practical. Bending more than once will cause metal fatigue and severely reduced load capacity.
$25.65
-
Simpson ABU44SS 4 x 4 Adjustable Post Base - Stainless Steel
Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance The ABU series are adjustable post bases with uplift. They have a 1” standoff for the post to help prevent end rot and are designed for maximum uplift performance New concrete- May be fastened to new (wet) concrete with embedded specified stainless anchors Cured Concrete- Use specified wedge anchor, Titen HD® concrete screw or cast-in-place stainless steel threaded stirrup set with specified acrylic or epoxy adhesive. May be fastened to stirrup with specified nails, stainless SD screws or bolts to achieve the same upload performance
$122.60
-
Simpson ABU66SS 6 x 6 Adjustable Post Base - Stainless Steel
Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance The ABU series are adjustable post bases with uplift. They have a 1” standoff for the post to help prevent end rot and are designed for maximum uplift performance New concrete- May be fastened to new (wet) concrete with embedded specified stainless anchors Cured Concrete- Use specified wedge anchor, Titen HD® concrete screw or cast-in-place stainless steel threaded stirrup set with specified acrylic or epoxy adhesive. May be fastened to stirrup with specified nails, stainless SD screws or bolts to achieve the same upload performance
$201.55
-
Simpson ABU88SS 8 x 8 Adjustable Post Base - Stainless Steel
Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance The ABU series are adjustable post bases with uplift. They have a 1” standoff for the post to help prevent end rot and are designed for maximum uplift performance New concrete- May be fastened to new (wet) concrete with embedded specified stainless anchors Cured Concrete- Use specified wedge anchor, Titen HD® concrete screw or cast-in-place stainless steel threaded stuf set with specified acrylic or epoxy adhesive. May be fastened to stirrup with specified nails, stainless SD screws or bolts to achieve the same upload performance
$626.50
-
Simpson BC4SS 4 x 4 Dual Post Base/Cap - Stainless Steel
Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance Dual purpose post cap/base for light cap or base connections Install with specified stainless steel fasteners
$57.85
-
Simpson BC40SS 4 x 4 Half Base - Stainless Steel
Made in the USA Type 316 Stainless Steel for ultimate corrosion resistance Dual purpose post cap/base for light cap or base connections Install with specified stainless steel fasteners
$40.50