Click product photos above ↑ for technical information
Installation Instructions
Drill a hole in the base material using a carbide drill bit the same diameter as the nominal diameter of the anchor to be installed.
Drill the hole to the specified embedment depth and blow it clean using compressed air. Overhead installations need not be blown clean. Alternatively, drill the hole deep enough to accommodate embedment depth and dust from drilling
Assemble the anchor with the nut and washer so the top of the nut is flush with the top of the anchor. Place the anchor in the fixture and drive into the hole until washer and nut are tight against the fixture.
Tighten to the required installation torque.
For More Technical Information, Click the Product Photos Above
Click to see pictures of the installation process
CA Residents:
Prop 65 Warning
Be the first to get news
on new products, specials, and more!