Hidden Deck Fasteners

3/8" diameter face grained smooth plug Tapered for easy insertion 350 plugs covers 100 square feet of decking Available in 3 convenient package sizes! Made in USA

Read more less

The Pro Plug System for Wood allows you to simply drill, screw and plug your hardwood deck. It all takes just a few seconds per plug! For use in decking that is between 3/4" (19mm) and 1-1/4" (32mm) thickKits include: Wood Plugs (5/16" diameter x 1/4") #8 x 2-1/2" Stainless Steel Screws 1 PRO PLUG glue nozzle (included in all but the 100pc kit) T20 star drive bits. The Pro Plug Tool is needed for installation and is not included in the kit. Add it on below. It is included in the starter kit. 100pc kit covers 25 sq ft 350pc kit covers 100 sq ft 1050 pc kit covers 300 sq ft The PRO PLUG™ System makes plugging fast & easy, cutting installation time in half! For use in decking that is between 3/4" (19mm) and 1-1/4" (32mm) thickAvailable for Ipe, Cambara, Cumaru, Garapa, Jatoba, Massaranduba, Meranti, Merbau, Red Balau & TigerwoodThe PRO PLUG™ Tool creates a screw hole and countersink portion that is perfectly matched to the included wood plugs. They're the perfect fit! The PRO PLUG™ Glue Nozzle coats the sides of the hole, which is where the glue is needed for holding power. Little or no glue is deposited on the bottom of the hole where excess glue can create a hydraulic lock preventing plug insertion.PRO PLUG™ Plugs combine the best of flared and straight walled plug design. The unique chamfer design with reduced flare angle offers easy insertion and an extremely tight fit as the plug compresses around the top of the hole. It allows for complete insertion of the plug without sawing or chiseling.PRO PLUG™ Starter KitIncludes (1) Pro Plug Tool for Wood, (1) Pack of 5 replacement bits, (1) bottle of Titebond III Glue, (2) pieces of 5" orbital sand paper - 60 grit, (3) T20 star drive bits

Read more less

Packages of 375 screws to go with the Pro Plug System®. ✔ Composite screws with a star drive and undercut head to penetrate the hard decking surface. ✔ Reverse threads under the head prevent mushrooming. Screw features a tri-lobe shank and acute thread angle to increase its driving power and penetrate cleanly through dense decking material. ✔ Screws feature a type 17 auger tip that allows for fast and easy driving while preventing splitting.Available in: Epoxy Stainless Steel Salt Water Grade 316 Stainless Steel Type 410 Stainless Steel for use with Trex Elevations® and other metal framing systems

Read more less

Ipe Clip® Extreme Hidden Deck Fasteners by DeckWise® Perfect for Composite, PVC and Hardwood Decking, not for use with Trex® Clips, Screws and Bits included. Ipe Clip® is up to 3x stronger than other deck fastening systems Fast & Easy installation even on 3/4" & thicker decking Clip dimensions are 1" x 1" and 1/8" thick Ipe Plugs included only in 175pc packs. Safer & blemish free deck surface No dangerous nail or screw pops! Automatic gap spacing Limited Lifetime Warranty Use the Coverage Calculator to find out how many you need

Read more less

*Packs include 375 plugs only, no tool. PRO PLUG® for Trex® is a superior plugging system for Trex® decking & trim combining screw down strength with the beauty of a hidden fastener system Install in 2 easy steps 1. Set the Pro Plug screw with the PRO PLUG PVC Tool 2. Tap the Trex® plug in with a hammer. Plugs are cut from the original Trex deck boards for a perfect match Must use the Pro Plug screws for proper installation Customize your own Pro Plug® System for Trex® Decking Kit. The plug packs contain 375 plugs for 100 sq ft. Add your screws (375 piece packs) from the choices above or order just the plugs! Be sure to add on the PVC Tool above, it is needed for installation

Read more less

*Packs include 375 plugs only, no tool. PRO PLUG® for Trex® is a superior plugging system for Trex® decking & trim, combining screw down strength with the beauty of a hidden fastener system Install in 2 easy steps1. Set the Pro Plug screw with the PRO PLUG PVC Tool 2. Tap the Trex® plug in with a hammer. Plugs are cut from the original Trex deck boards for a perfect match Must use the Pro Plug screws for proper installation Customize your own Pro Plug® System for Trex® Decking Kit. The plug packs contain 375 plugs for 100 sq ft. Add your screws (375 piece packs) from the choices above or order just the plugs! Be sure to add on the PVC Tool, it is needed for installation

Read more less

Screws for steel joist deck framing systems Cap-Tor xd Metal (formerly Deckfast® Metal) is a versatile fastener designed to attach every type of decking - PVC, composite, capstock, or hardwood to steel and aluminium substructures. Screws are #10 x 1-5/8". Ask us about the Buildex Teks Select version of this screw for Trex Elevations steel deck framing. To achieve a clean and uniform appearance, with screws set at a perfect and consistent depth below the surface use the Smart Bit Depth Setter to install. Triple strength corrosion protection 410 Stainless Steel + Zinc Plating + Epoxy Coating Specially engineered head easily cuts through the hard outer layer of capstock decking products and also self-countersinks into IPE and other hardwoods resulting in a clean, uniform appearance #3 Drill point is designed to attach one inch thick decking to both 18 & 14 gauge steel joists as well as two (doubled-up) 14 gauge joists. T20 Star Drive

Read more less

Stainless Steel Screws with Color Coated Heads For Hardwood, Cedar, Redwood and Pressure Treated Decking Headcote screws are designed to work with Smart-Bit® Predrilling and Countersinking Tools, for a perfect finish. Not sure what color you need? Use the interactive Deck Matcher

Read more less

Stainless Steel Screws with Color Coated Heads For Hardwood, Cedar, Redwood and Pressure Treated Decking Headcote screws are designed to work with Smart-Bit® Predrilling and Countersinking Tools, for a perfect finish.

Read more less

Ipe Clip® ExtremeKD®Hidden Deck Fasteners by DeckWise® Perfect for Composite, PVC and Kiln Dried Hardwood Decking, not for use with Trex® Allows for expansion of width of kiln dried hardwoods Clips, Spacers, Screws and Bits included. Ipe Clip® is up to 3x stronger than other deck fastening systems Fast & Easy installation even on 3/4" & thicker decking Ipe Plugs included only in 175pc packs. Safer & blemish-free deck surfaceNo dangerous nail or screw pops! Automatic gap spacing Ipe Clip Installation Guide Limited Lifetime Warranty 🖩 Calculate how many clips you need for your deck here.

Read more less

Packs are 100 lin ft (40 sq ft) and include everything you need, the plugs, screws and Pro Plug Tool. PRO PLUG® for Trex® is a superior plugging system for Trex® decking & trim combining screw down strength with the beauty of a hidden fastener system Install in 2 easy steps...Set the screw with the PRO PLUG PVC Tool and tap in the Trex® plug with a hammer. Plugs are cut from actual Trex® board for a perfect match Kits available in Stainless Steel or Epoxy Coated Carbon Steel The PRO PLUG PVC Tool drives fasteners to the correct depth every time. Its No Cam-Out Auto Stop™ prevents screw recess from stripping This 100 lin. ft. kit (40 sq feet) includes: (150) 2-3/4" Epoxy Coated Carbon Steel Screws with a T20 star recess (165) Trex® Plugs cut from the original Trex® material for a perfect match (1) Pro Plug Tool for PVC Trex Enhance kits include 1 scalloped profile template

Read more less

Stainless Steel Screws with Color Coated Heads For Hardwood, Cedar, Redwood and Pressure Treated Decking Headcote screws are designed to work with Smart-Bit® Predrilling and Countersinking Tools, for a perfect finish. Not sure what color you need? Use the interactive Deck Matcher

Read more less

Stainless Steel Screws with Color Coated Heads For Hardwood, Cedar, Redwood and Pressure Treated Decking Headcote screws are designed to work with Smart-Bit® Predrilling and Countersinking Tools, for a perfect finish. Not sure what color you need? Use the interactive Deck Matcher

Read more less

Stainless Steel Screws with Color Coated Heads For Hardwood, Cedar, Redwood and Pressure Treated Decking Headcote screws are designed to work with Smart-Bit® Predrilling and Countersinking Tools, for a perfect finish. Not sure what color you need? Use the interactive Deck Matcher

Read more less

*Packs are 100 lin ft (40 sq ft) and include everything you need, the plugs, screws and Pro Plug Tool. PRO PLUG® for Azek® is a superior plugging system for Azek® / Timbertech decking & trim combining screw down strength with the beauty of a hidden fastener system ✔ Install in 2 easy steps...Set the screw with the PRO PLUG PVC Tool and tap in the Azek® plug with a hammer. ✔ Plugs are cut from actual Azek® / Timbertech board for a perfect match ✔ The PRO PLUG PVC Tool drives fasteners to the correct depth every time. Its No Cam-Out Auto Stop™ prevents screw recess from stripping 100 lin. ft. kit (40 sq feet) includes: ✔ (150) 2-3/4" Epoxy Coated Carbon Steel Screws with a T20 star recess ✔ (165) Azek® Plugs cut from the original Azek® material for a perfect match ✔ (1) Pro Plug Tool for PVC

Read more less

Packs are 100 lin ft (40 sq ft) and include everything you need, the plugs, screws and Pro Plug Tool. PRO PLUG® for Trex® is a superior plugging system for Trex® decking & trim combining screw down strength with the beauty of a hidden fastener system Install in 2 easy steps...Set the screw with the PRO PLUG PVC Tool and tap in the Trex® plug with a hammer. Plugs are cut from actual Trex® board for a perfect match Kits available in Stainless Steel or Epoxy Coated Carbon Steel The PRO PLUG PVC Tool drives fasteners to the correct depth every time. Its No Cam-Out Auto Stop™ prevents screw recess from stripping This 100 lin. ft. kit (40 sq feet) includes: (150) 2-3/4" Epoxy Coated Carbon Steel Screws with a T20 star recess (165) Trex® Plugs cut from the original Trex® material for a perfect match (1) Pro Plug Tool for PVC Trex Enhance kits include 1 scalloped profile template

Read more less

3/8" diameter tapered, face grained plugs Uniform 3/8" length Chamfered end for easy insertion Install with wood glue recommended by decking manufacturer 350 plugs covers 100 square feet of decking Available in 3 convenient package sizes Made in USA

Read more less

Face Grained Ipe plugs 5/16" in diameter. 1000 piece Ipe plug packs For use with the Pro Plug System.

Read more less

T-15 Star Drive Type 17 pt 350 pc boxes 305 Stainless Steel Deckwise Hardwood Brown Trim screws are compatible with Ipe Clips

Read more less

For Composite & Capstock Decking CAP-TOR xd is designed for use with Trex, Timber-Tech, Fiberon, Azek and other composites & capstocks Type 305 Stainless Steel for superior corrosion resistance Extra deep T-20 star recess to minimize "wobble" at screw starting Undercut head design - a specially engineered head that cleanly penetrates the hard outer coating of capstock products Transverse™ Threading eliminates "mushroom" effect common to composite decking installed using standard deck screws. Auger Point for faster, easier entry. Helps prevent splitting Available in 15 colors to blend with a wide range of composite deck board colors Use the Deck Matcher to find the best color. For a uniform finish install using the Smart-Bit Depth Setter

Read more less

For Composite & Capstock Decking CAP-TOR xd is designed for use with Trex, Timber-Tech, Fiberon, Azek and other composites & capstocks Type 305 Stainless Steel for superior corrosion resistance Extra deep T-20 star recess to minimize "wobble" at screw starting Undercut head design - a specially engineered head that cleanly penetrates the hard outer coating of capstock products Transverse™ Threading eliminates "mushroom" effect common to composite decking installed using standard deck screws. Auger Point for faster, easier entry. Helps prevent splitting Available in 15 colors to blend with a wide range of composite deck board colors Use the Deck Matcher to find the best color. For a uniform finish install using the Smart-Bit Depth Setter

Read more less

Stainless Steel Screws with Color Coated Heads For Hardwood, Cedar, Redwood and Pressure Treated Decking Headcote screws are designed to work with Smart-Bit® Predrilling and Countersinking Tools, for a perfect finish. Not sure what color you need? Use the interactive Deck Matcher

Read more less

The TC-G is the perfect hidden deck clip created to be used with 5/4" grooved deck boards. You may also use the TC-G with TC-G slot cutter on non grooved deck boards. See product demo video below! Spacer tabs on the clip automatically gap the decking 3/16" The easy-to-install clips are made of 304 Stainless Steel with a black oxide coating. Minimizes cupping & splitting of deck boards 25-year warranty by the manufacturer Covers 50 sq ft of decking Use in Trex®, Wolf™ PVC, Ipe, Teak, Cambara, Meranti, Fiberon Horizon®, ChoiceDek, MoistureShield™, Veranda® Decking, and more! More brands listed in Product Details link Below. Not designed for AZEK®, Timbertech® and Rhino Deck®TC-G 90 pc Kit Contents: (90) Clips (92) 1-5/8" stainless steel screws (1) #1 square drive bit Installation Instructions: TCG Full Product Details: TC-G

Read more less

New Universal Deck Clip System! New System design allows for fast and easy installation Use with pre-grooved composite, PVC, or wood decking Clips are collated with preinstalled screws, screws available in 305 Stainless or marine grade 316 Stainless Steel Screws are 1-3/4" long with a T-15 Star Drive Installation and board compatibility information Do not use an impact driver to install Creates 3/16" gap spacing between deck boards First and last boards require starter clips

Read more less

100 piece plugs packs for the Pro Plug® System. Perfect for replacing a few lost plugs or for finishing up a job. Plugs are 5/16" (8.5mm) in diameter. Face Grain plugs to match wood perfectly These chamfered plugs are designed to install easily and fit snugly. They stay put over time. No more plugs that pop up after weathering! Light sanding is recommended Use with the Pro Plug Tool for Wood

Read more less

Packs are 100 sq ft and include everything you need, the plugs, screws and Pro Plug Tool. PRO PLUG® for Trex® is a superior plugging system for Trex® decking & trim combining screw down strength with the beauty of a hidden fastener system Install in 2 easy steps...Set the screw with the PRO PLUG PVC Tool and tap in the Trex® plug with a hammer. Plugs are cut from actual Trex® board for a perfect match Kits available in Stainless Steel or Epoxy Coated Carbon Steel The PRO PLUG PVC Tool drives fasteners to the correct depth every time. Its No Cam-Out Auto Stop™ prevents screw recess from stripping This 100 sq. ft. kit includes: (350) 2-1/2" Stainless Steel Screws with a T20 star recess (375) Trex® Plugs cut from the original Trex® material for a perfect match (1) Pro Plug Tool for PVC Trex Enhance kits include 1 scalloped profile template

Read more less

Packages are 100 lin ft (40 sq ft) and include the Pro Plug Tool. The PRO PLUG® System is a superior plugging system for Trex® decking & trim combining screw down strength with the beauty of a hidden fastener system Install in 2 easy steps...Set the screw with the PRO PLUG PVC Tool and tap in the Trex® plug with a hammer. Plugs are cut from actual Trex® board for a perfect match Kit covers 40 square feet of decking Also available with epoxy coated carbon steel screws The Pro Plug Tool is needed for installation and is included in the kit. Nothing else to buy! The 100 lin ft. kit (40 sq ft) includes: ✔ (150) 2-1/2" Type 305 Stainless Steel Screws with a T20 star recess ✔ (165) Trex® Plugs cut from the original Trex® material for a perfect match ✔ Available in Stainless Steel or Epoxy Coated Carbon Steel ✔ The Pro Plug Tool is included in this kit. ✔ The PRO PLUG PVC Tool drives fasteners to the correct depth every time. Its No Cam-Out Auto Stop™ prevents screw recess from stripping

Read more less

Stainless Steel Screws with Color Coated Heads For Hardwood, Cedar, Redwood and Pressure Treated Decking Headcote screws are designed to work with Smart-Bit® Predrilling and Countersinking Tools, for a perfect finish. Not sure what color you need? Use the interactive Deck Matcher

Read more less

For Composite & Capstock Decking Type 316 Stainless Steel for the Ultimate in corrosion resistance Salt Water Safe Extra deep T-20 star recess to minimize "wobble" at screw starting Undercut head design - a specially engineered head that cleanly penetrates the hard outer coating of capstock products Transverse™ Threading eliminates "mushroom" effect common to composite decking installed using standard deck screws. Auger Point for faster, easier entry. Helps prevent splitting Available in 10 colors to blend with a wide range of composite deck board colors Use the Deck Matcher to find the best color. For a uniform look, install using the Smart-Bit Depth Setter

Read more less

For Composite & Capstock Decking CAP-TOR xd is designed for use with Trex, Timber-Tech, Fiberon, Azek and other composites & capstocks Type 305 Stainless Steel for superior corrosion resistance Extra deep T-20 star recess to minimize "wobble" at screw starting Undercut head design - a specially engineered head that cleanly penetrates the hard outer coating of capstock products Transverse™ Threading eliminates "mushroom" effect common to composite decking installed using standard deck screws. Auger Point for faster, easier entry. Helps prevent splitting Available in 15 colors to blend with a wide range of composite deck board colors Use the Deck Matcher to find the best color. For a uniform finish install using the Smart-Bit Depth Setter

Read more less

Stainless Steel Screws with Color Coated Heads For Hardwood, Cedar, Redwood and Pressure Treated Decking Headcote screws are designed to work with Smart-Bit® Predrilling and Countersinking Tools, for a perfect finish.

Read more less

Buy 2 Combo Kits and get the Pneumatic Installation Gun Free*! Designed for 5/4" grooved deck boards. May also use with TC-G Slot Cutter to groove your own boards Clips made of 304 Stainless Steel Automatic 3/16" gap spacing Reduces wood splitting, cupping and wood rotting. Combo Kit includes 900 TC-G Clips and 930pc box of Tiger Claw Carbon Steel Scrails (Screw Nails) Install using the Tiger Claw Pneumatic Install Gun. Installs an average of 400 sq ft of decking in just 1 hour Buy 2 Kits and the gun is free*! Some restrictions apply, contact us for details. ! Covers 500 square feet of decking Manufacturer 25 year warranty Use with Deck boards like Trex Select ChoiceDek by Lowes Fiberon Pro-Tect, Horizons, and Paramount Wolf PVC Ipe, Brazilian Redwood, Teak, Meranti and more!

Read more less

Ipe Clip® Extreme S® Hidden Deck Fasteners by DeckWise® Perfect for Composite, PVC and Hardwood Decking, not for use with Trex® Formerly Ipe Clip Extreme 4- new clip design, same spacing Clips, Spacers, Screws and Bits included. Ipe Clip® is up to 3x stronger than other deck fastening systems Fast & Easy installation even on 3/4" & thicker decking Clip dimensions are 1" x 1" and 1/8" thick Ipe Plugs included only in 175pc packs. Safer & blemish free deck surface No dangerous nail or screw pops! Automatic gap spacing Limited Lifetime Warranty

Read more less

For Composite & Capstock Decking Type 316 Stainless Steel for the Ultimate in corrosion resistance Salt Water Safe Extra deep T-20 star recess to minimize "wobble" at screw starting Undercut head design - a specially engineered head that cleanly penetrates the hard outer coating of capstock products Transverse™ Threading eliminates "mushroom" effect common to composite decking installed using standard deck screws. Auger Point for faster, easier entry. Helps prevent splitting Available in 10 colors to blend with a wide range of composite deck board colors Use the Deck Matcher to find the best color. For a uniform look, install using the Smart-Bit Depth Setter

Read more less

For Composite & Capstock Decking Type 316 Stainless Steel for the Ultimate in corrosion resistance Salt Water Safe Extra deep T-20 star recess to minimize "wobble" at screw starting Undercut head design - a specially engineered head that cleanly penetrates the hard outer coating of capstock products Transverse™ Threading eliminates "mushroom" effect common to composite decking installed using standard deck screws. Auger Point for faster, easier entry. Helps prevent splitting Available in 10 colors to blend with a wide range of composite deck board colors Use the Deck Matcher to find the best color. For a uniform look, install using the Smart-Bit Depth Setter

Read more less

Stainless Steel Screws with Color Coated Heads For Hardwood, Cedar, Redwood and Pressure Treated Decking Headcote screws are designed to work with Smart-Bit® Predrilling and Countersinking Tools, for a perfect finish.

Read more less

Carbide blade for long lasting consistent results Cuts grooves in 5/4" decking for installation of TC-G hidden deck clips For use with many handheld routing tools, simply route out the portion of the decking directly above the framing joists to create a perfectly positioned grooved to accept hidden fastening clips.

Read more less

Designed as a mirror image of the TC-G clip (screw hole on the left) allowing for installation of 2 clips per joist at the butt seams. Eliminates the need for sister joists and creates a much stronger connection. Made from Type 304 Stainless Steel Approved for use in ACQ lumber Helpful for additional decking techniques like picture framing, miters, and general fastening of grooved decking

Read more less

Designed for 5/4" grooved deck boards. May also use with TC-G Slot cutter to groove your own boards Clips made of 304 Stainless Steel Automatic 3/16" gap spacing Reduces wood splitting, cupping and wood rotting. Pail includes 900 TC-G Clips, screws not included Use with Pneumatic Scrails either Carbon Steel or Stainless Steel versions available Install using the Tiger Claw Pneumatic Install Gun. Installs an average of 400 sq ft of decking in just 1 hour! Bucket covers 500 square feet of decking Manufacturer 25 year warranty Use with Deck boards like All Trex Profiles ChoiceDek by Lowes Fiberon Pro-Tect, Horizons, Paramount and Symmetry Moisture Shield Ipe, Brazilian Redwood, Teak, Meranti and more! Product PDFs:TC-G Installation InstructionsTC-G Product Details

Read more less

6 x 1-1/2" Black oxide coated Stainless Steel Scrails - a screw nail 33° Collated strips that fit theTiger Claw Pneumatic Gun Used to install hidden deck clips like the TC-G to cover 500 sq ft Approved for use in ACQ lumber Installs the TC-G Bucket to cover 500 sq ft of decking

Read more less

For use with the TC-G Clips and Scrails- Carbon Steel or Stainless Steel options available Installs an average of 400 sq ft of decking per hour Tool's unique design features a nose that hold clips in correct position for install. Fires scrails (a screw nail) through the clip and into the joist. Fastens the deck board to the joist in a single step! Lifetime warranty with registration Includes: Tool DVD Adjusting wrenches Gun oil Owner's manual

Read more less

33° Collated Scrails for the Tiger Claw Pneumatic Install Gun Used to install Tiger Claw hidden deck fastening clips like the TC-G, covers 500 sq ft Approved for use in ACQ lumber! Use a #1 or #2 phillips driver bit to remove after initial install if needed Screws are #6 x 1-1/2" and are made of Black Oxide Coated Carbon Steel

Read more less

Redesigned to integrate a Type 300 series stainless steel reinforcing plate For Wood Decks only Provides consistent spacing and uniform height Finished deck has a clean, fastener-free surface Holds boards securely while maintaining flexibility for seasonal contraction/expansion Easy to install! Details and install guide How Many Hidden Fasteners Do I Need? EB-TY Fastener Calculator

Read more less

For use on first and last board when installing Clip & Rip Universal Deck Clips One clip is installed at every joist Box includes 12 clips Installation Instructions For first and last boards only! Screw a starter clip at each joist Once the clips are installed, push the first board into the starter clips to secure. Install the rest of the boards with standard clips

Read more less

Manufactured by Starborn Industries *Packs include 375 plugs only, no tool PRO PLUG® is a high quality plugging system for use with both AZEK® / TimberTech decking & trim. This system delivers a fastener-free surface without compromising the screw down strength you get from traditional deck fastening. This system is designed for efficient installation. Each plug takes only a few seconds to install! The Pro Plug Tool for PVC ensures the Pro Plug® screw is inserted at the perfect depth and the plug fits snugly in place. The finished look is streamlined and professional. Each plug is cut from actual AZEK® / TimberTech deck board for a high end finish. Pair with the required Pro Plug System epoxy or stainless steel screws to match the level of corrosion resistance needed for your project Customize your own Pro Plug® System for AZEK® Decking Kit. The plug packs contain 375 plugs for 100 sq ft. The PVC Tool® is sold seperately. Add it on above. Add your Pro Plug screws (375 piece packs) from the choices above

Read more less

Packs are 100 sq ft and include everything you need, the plugs, screws and Pro Plug Tool. PRO PLUG® for Trex® is a superior plugging system for Trex® decking & trim combining screw down strength with the beauty of a hidden fastener system Install in 2 easy steps...Set the screw with the PRO PLUG PVC Tool and tap in the Trex® plug with a hammer. Plugs are cut from actual Trex® board for a perfect match Kits available in Stainless Steel or Epoxy Coated Carbon Steel The PRO PLUG PVC Tool drives fasteners to the correct depth every time. Its No Cam-Out Auto Stop™ prevents screw recess from stripping This 100 sq. ft. kit includes: (350) 2-3/4" Epoxy Coated Carbon Steel Screws with a T20 star recess (375) Trex® Plugs cut from the original Trex® material for a perfect match (1) Pro Plug Tool for PVC Trex Enhance kits include 1 scalloped profile template

Read more less

Packages are 100 lin ft (40 sq ft) and include the Pro Plug Tool. PRO PLUG® for Trex® Enhance is the newly released plugging system for Trex® Enhance scalloped profile decking. It combines screw-down strength with the beauty of a hidden fastener system. Install in 2 easy steps...Set the screw with the PRO PLUG PVC Tool and tap in the Trex® plug with a hammer. Plugs are cut from actual Trex® board for a perfect match Kit covers 40 square feet of decking Also available with epoxy coated carbon steel screws The Pro Plug Tool is needed for installation and is included in the kit. Nothing else to buy! The 100 lin ft. kit (40 sq ft) includes: ✔ (150) 2-1/2" Type 305 Stainless Steel Screws with a T20 star recess ✔ (165) Trex® Plugs cut from the original Trex® material for a perfect match ✔ (1) scalloped profile template ✔ Available in Stainless Steel or Epoxy Coated Carbon Steel ✔ The Pro Plug Tool is included in this kit. ✔ The PRO PLUG PVC Tool drives fasteners to the correct depth every time. Its No Cam-Out Auto Stop™ prevents screw recess from stripping

Read more less