Simpson Strong Tie Stainless Steel Titen HD® Heavy Duty Screw Anchors
|Simpson Strong-Tie® Stainless Steel Anchoring Systems|
Simpson Strong-Tie® Stainless Steel Titen HD® Heavy Duty Screw Anchors
in Type 316 Stainless Steel
Drill a hole in the base material using a carbide drill bit with the same diameter as the nominal diameter of the anchor to be installed. Drill the hole to the specified embedment depth plus minimum hole depth overdrill (1/4" for the 3/8" Titen) to allow the thread tapping dust to settle, and blow it clean using compressed air. (Overhead installations need not be blown clean.) Alternatively, drill the hole deep enough to accommodate embedment depth and the dust from drilling and tapping. )
Tighten the anchor into the base material until the countersunk head contacts the fixture.
The Simpson Titen HD Heavy Duty Screw Anchors are a perfect solution for anchoring concrete and masonry. |
Insert the anchor through the fixture and into the hole.
|Back to Simpson Main Product Listing
Product images and data courtesy of Simpson Strong-Tie Co, Inc®