Products
-
15° Coil Siding Nails, 3600pcs, Stainless Steel
Stainless Steel Wire collated, 15°, annular thread Full round diamond patterned head Available in both AISI 304 & 316 stainless steel Nail dimensions meet Fiber Cement Siding Industry requirements Commonly Used Tools for Installation Bostitch: N50C, N55C, N55CP, N57C, N58C, N63CP, N64C, N64CP, N65CP, N66C, N66C-1, N70C, N70CB, N75C, N80C, N80CB, N86C, N89C, N100C, N100CPP, N130CHitachi: NV65AB, NV65AC, NV65AH, NV75AGPaslode; 3250/HSF, 3225/N55, 4250/65CP, 4275/CN70, 5325/CN80, 5350 90C, F275C, F325C, P275C, P350C
$142.40 - $275.50
-
18 Gauge Collated Straight Brads, 1000pc, 304 Stainless Steel
Type 304 Stainless Steel 18 gauge smooth shank stick brads Approved for use in ACQ Lumber Brads are thinner than finish nails and used for trim work, baseboards, as well as cabinets and furniture construction. The thin profile of a brad is designed to help prevent wood splitting. Stainless brads are preferred for outdoor applications. They are perfect for projects like bird houses, storage containers, window/door trim, and flower boxes. Commonly Used Tools for Installation Bostitch: BT1855, BT31-1B, BT35B, BT50, BT50B, BT200K, SB-2IN1, SB-125BN, SB-1842BN, SB-1850BN, T29-30, BTFP1850K Campbell Hausfeld: B0040, CHN10100RB, CHN10499, IFN00300, NB0030, NB003008, NB0033000, SB504000, SB514000, SB524000 Craftsman; 18309, 18310, 18323, 18424, 18433, 18454, 18496, 18499, 351.153000, 351.181720, 351.181760, 351.181730, ETT3212H Hitachi; NT50AE, NT50AE2, NT45A, NT32AE, NT32AE2, NT50AD Paslode: 2138-F18II, 9010000, IM200-F18, IM200Li, T200-F18, T125-F18, F200-F18
$7.20 - $17.00
-
Titen HD Concrete Screw Anchor, 316 Stainless Steel
Titen HD® is made from Type 316 Stainless Steel with carbon-steel lead-threads Perfect for concrete and masonry where corrosion is a concern. Serrated carbon-steel threads at the tip cut concrete and allow remaining threads to interlock with the concrete. Contains less than 1% carbon steel to minimize expansion compared to 18% found in other stainless screw anchors. Unlike other anchors, the Titen HD® will not cause concrete failure due to rust. See design info PDF in the specs section below. Install by hand or with an impact wrench. See PDF in spec section for installation information Trusted Fasteners for Every Build From concrete screw anchors to hidden deck fasteners, Manasquan Fasteners supplies professional-grade fasteners built for strength and reliability. As experienced fastener suppliers, we support builders and contractors with solutions designed to perform across a wide range of construction applications.
$4.50 - $24.80
-
Flat Washers, Stainless Steel
Type 18-8 and 316 Stainless Steel Sold by the piece Features/System Components: Even Clamping Load Distribution: Distributes force over a broad bearing surface to prevent bolt heads and nuts from crushing, splintering, or sinking into wood fibers when under tension. Dual Corrosion-Resistant Grades: Available in 18-8 stainless steel for everyday outdoor durability and marine-grade 316 stainless steel for maximum protection in saltwater, chemical, and coastal environments. Filling in the Gaps: Stainless steel flat washers can be used to compensate for oversized or slotted clearance holes across timber joints. Flexible Quantity and Bulk Savings: All flat washer sizes are sold individually for custom project needs, with automatic volume discounts available on orders of 100 stainless steel washers or more.
$0.08 - $3.50
-
7/16" Crown "N" Series Staples, 16 Gauge, 1000pc Box, 304 Stainless Steel
7/16" Crown - 16 Gauge Wire Similar to Senco "N" series staples Staple crown is measured as outside diameter Case discounts shown below for 8+ boxes Approved for use in treated lumber
$27.65 - $220.66
-
Roofing Nails, Stainless Steel
304 & 316 Stainless Steel with Annular Thread Large flat head, diamond point Use to fasten natural wood, slate, or copper roofing Available in annular thread for superior holding power Made in the USA AISI Grade 316 stainless steel has a lower carbon content than 305 or 302HQ and contains molybdenum for enhanced protection against salt water and other highly corrosive environments. It is the grade of stainless steel that should be used in any seaside application. Features: Structural Longevity: Stainless steel roofing nails match the lifespan of premium roofing materials like slate and tile. Stain Prevention: These stainless steel nails eliminate unsightly streaks and rust bleeding on shingles and other roofing materials. High Tensile Strength: Roofing nails are designed to resist bending during installation. Stainless ring shank nails, in particular, are engineered to withstand extreme wind uplift forces.
$14.50 - $380.80
-
U2 Fasteners Construction Screw, 316 Stainless Steel
The Construction screw does the job of a lag screw. Dome Head enhances the structural capability. Tapper Point which consists of the Cork Screw Start and Blade Cutting Thread for easy piercing and alleviating strain on the material. Specially designed Tight Star Recess system holds U2 bits firmly in place allowing these screws to be installed with one hand. "Talon Grip" nibs under the head hold the screw tight to prevent loosening and dig into the material when countersunk. Reamer Thread enlarges the hole in the material to create a larger passage when drawing materials together and reduces tension on the screw head. ***This thread is not on the 1/4" x 2" screw
$29.75 - $771.15
-
Sharx Screws for Marine Use, 316SS
Type 316 Stainless Steel for Superior Corrosion Resistance Sharx marine stainless screws are made of saltwater-safe Type 316 Stainless Steel. Use these premium Sharx screws in composite materials, fiberglass, engineered wood products such as plywood, OSB, laminated wood veneers, and wood substitutes. High-low thread form with "teeth" bites fast and holds tight Strength compares favorably with that of carbon steel fasteners Screws up to 1" in length are fully threaded; screws more than 1" long are threaded for two-thirds of the shank length #2 Phillips drive; extra sharp point Also available with a pan head Features/System Components: 316 Marine-Grade Alloy: Exceptional corrosion resistance against saltwater and sea spray makes Sharx screws well suited to harsh offshore conditions. They are a dependable choice for marina repairs and construction, whether you need a yacht marine screw or an all-purpose stainless steel boat screw for your toolbox. Serrated High-Low Threads: Active-cutting threads bite into dense fiberglass and composites without splitting or binding. Anti-Vibration Hold: Sharx screws feature serrated teeth that lock firmly into substrates, preventing them from backing out due to hull flexing or heavy wave impact. Sharp Starting Point: Grips instantly on slick surfaces for fast, slip-free drives. Simpson Screws: Made by Simpson Strong-Tie, a global leader in structural solutions. Simpson Strong-Tie has engineered and manufactured quality construction fasteners for 70 years, making it a name you can trust.
$15.30 - $393.50
-
1/4" Crown "L" Series Staples, 18 Gauge, 1000pc Box, 304 Stainless Steel
18 Gauge "L" Series Staples Type 304 Stainless Steel Similar to Senco™ "L" series staples Chisel point, high tensile strength
$10.60 - $20.75
-
Bugle Head Screws, Star Drive, Stainless Steel
6 Lobe Star drive recess, similar to Torx® Self-countersinking bugle head in medium & soft density wood Type 17 notched point for fast penetration Threaded approximately 2/3 of shank on most sizes Deep coarse threads for better hold Approved for use in all pressure treated lumber Always specify Type 316 Stainless Steel for Salt Water applications New package sizes, same screws Important Installation Instructions: If the screws are to be driven by a screw gun, be sure the bit is securely seated in the star recess of the screw. Start slowly and gradually increase speed until the head is driven flush. A high driving speed increases the chance of stripping the drive recess. If the tool has an adjustable torque collar, use a piece of scrap lumber to determine the proper setting needed to drive the head flush with the surface. This will prevent the screw head from twisting off.
$108.25 - $510.65
-
Flat Head Deck-Drive™ DWP Wood Screws, 316 Stainless Steel
Star Drive - Type 316 Stainless Steel Experience the revolutionary 4 corner thread with raised ridge point for fast penetration, reduced drive torque and outstanding holding power. Self Countersinking Flat Head with Nibs Install using 35% less torque! For Decking, Docks and Boardwalks; Finishing, Millwork & Trim Star Drive 6 Lobe Type 316 Stainless Steel for the ultimate in corrosion resistance Approved for use in ACQ treated lumber
$69.15 - $852.95
-
1/4" Crown "L" Series Staples, 18 Gauge, 1000pc Box, 316 Stainless Steel
Narrow Crown - 18 Gauge Type 316 Stainless Steel Similar to Senco™ "L" series staples Chisel point, high tensile strength MADE IN USA
$17.60 - $29.30
-
Hex Nuts, Stainless Steel
Hex nuts thread onto a bolt or rod to lock two pieces of material together, spreading the load evenly across the connection. Stainless steel hex nuts resist rust, so they hold up in rain, humidity, or salt air without the orange staining you get from standard zinc-plated hardware. Match the nut size to your bolt diameter and thread pitch before you order, since the wrong thread won't seat properly. Stainless steel threaded fasteners are more prone to galling than some other materials. Always apply a suitable lubricant or anti-seize compound during assembly to help prevent the threads from seizing. Product Features: Consistent sizing across the batch, so every nut threads on the same way, every time Corrosion-resistant, stainless construction for outdoor, marine, and coastal projects Fits a matching stainless steel bolt, or threaded rod We carry coarse-thread nuts and bolts in diameters up to 1" Available in Type 18-8 and 316 Stainless Steel Sold individually, with savings on quantities of 100 or more Make sure to pair stainless steel hexagonal nuts with corresponding stainless bolts, washers, and rod. Mixing stainless with other alloys like galvanized steel and zmax is not recommended, especially in coastal environments.
$0.07 - $5.00
-
Pro Plug System Screws for Deck and Trim, 375pcs for 100 Sq Ft
Packages of 375 screws to go with the Pro Plug System®. ✔ Composite screws with a star drive and undercut head to penetrate the hard decking surface. ✔ Reverse threads under the head prevent mushrooming. Screw features a tri-lobe shank and acute thread angle to increase its driving power and penetrate cleanly through dense decking material. ✔ Screws feature a type 17 auger tip that allows for fast and easy driving while preventing splitting.Available in: Epoxy Stainless Steel Salt Water Grade 316 Stainless Steel Type 410 Stainless Steel for use with Trex Elevations® and other metal framing systems
$69.15 - $297.70
-
16 Gauge Collated Straight Brads, 1000pcs, 304 Stainless Steel
Type 304 Stainless Steel 16 gauge smooth shank stick brads Straight Collation Available in 1,000pc boxes, discounts at 5 or more boxes Remember to check your nail gun for leg length limitations before ordering Commonly Used Tools for Installation Bostitch: FN16250K, FN1664K, FN16250K-2, GFN1664K, SB-1664FN, T35-40, T36-50 DeWalt: DC606K, D51256K, D51257K, D51276, DC612KA, DC616KN Hitachi: NT65A, NT65A2, NT65A3, NT65M, NT65M2, NT65GS
$20.30 - $34.25
-
35° Angled Finish Nails, 1000pc Box, 304 Stainless Steel
15 gauge angled finish nails 35° tape collated Smooth shank brad head Fits Senco DA Series Available in 1,000 pc boxes and discounted at 5 or more boxes Fits SENCO, Porter Cable, Hitachi, DeWalt and more... Commonly Used Tools for Installation Senco: AirFree 41, FinishPro 41XP, FinishPro 42XP, FinishPro 35XP, FinishPro 35Mg, SFN40, SFN65DA, SFN30, SFN1, SFN2B, SN1, Fusion F15 Porter Cable: DAFN-6480, DA250A, DA250B, DA250C, CDA250 Hitachi: NT65MA, NT65MA2, NT65MA3, NT65MA4, NT65AA, NT65GA DeWalt: D51275K, D51276K, DC628K, DWFP721555
$26.35 - $47.15
-
Pro Plug® Tool for PVC
Designed to integrate with the PRO PLUG PVC PLUG SYSTEM Drives fasteners to the correct depth every time in deck & trim applications No Cam-Out Auto-Stop mechanism prevents screw recess stripping Free Spinning Stop Collar protects the decking surface while the rubber O ring prevents damage to the work surface once the target depth is reached Special Star Drive Bits for both decking and trim applications are included
$22.30
-
Pro Plug Tool for Wood
Smart-Bit® PRO PLUG™ Tool for wood contains one Smart-Bit Tool, 2 replacement bits, 1 stub bit and 1 hex wrench The stub bit is designed for plug only installations with no fasteners. For easy install make sure to have a corded power drill, power sander, wood glue and hammer or mallet on hand. Installation Instructions (pdf file) Average Lifespan of the Pro-Plug Tool (pdf file) Pre-drills and Counterbores Perfectly- The patented # 8 Pro Plug Tool for Wood creates a screw hole and countersinks all in one step. The tool is designed for use with the Pro Plug System for Wood by Starborn Industries. Cuts Through Decking and Flooring More Than 2X as Fast As Standard Wood Bits- The drill bits feature Powerbolic fluting, enabling the bits to bore twice as fast, speeding up installation Spinning Stop Collar With O-Ring Prevents Damage To Board Surface- stop collar spins independently of the drill and counterbore assembly. The hole is complete when the stop collar stops spinning Includes Tool, 2 Replacement Bits, 1 Stub Bit, and a Hex Wrench- the stub bit is designed for plug only installations with no fasteners. For easy install make sure to have a corded power drill, power sander, wood glue and hammer or mallet on hand. For Best Results, View The Pro Plug Tool Life PDF- this will give you an idea of how many tools are needed to complete your job. This is based on the wood used. One tool will work for 100 sq ft of Ipe or Cumaru but the same tool will last for 200 sq ft of Meranti or Red Balau
$30.65
-
Joist Hanger / Framing Connector Nails, 316SS
Type 316 Stainless Steel Annular Thread, flat head Made of type 316 stainless steel for the ultimate corrosion resistance For installation of stainless steel joist hangers & framing connectors Made in USA AISI Grade 316 Stainless Steel has lower carbon content than 305 or 302HQ and contains molybdenum for superior corrosion resistance in salt water and other highly corrosive environments. It is the grade of stainless steel to be specified in any seaside application.
$22.45 - $415.00
-
Pro Plug System for Wood
The Pro Plug System for Wood allows you to simply drill, screw and plug your hardwood deck. It all takes just a few seconds per plug! For use in decking that is between 3/4" (19mm) and 1-1/4" (32mm) thickKits include: Wood Plugs (5/16" diameter x 1/4") #8 x 2-1/2" Stainless Steel Screws 1 PRO PLUG glue nozzle (included in all but the 100pc kit) T20 star drive bits. The Pro Plug Tool is needed for installation and is not included in the kit. Add it on below. It is included in the starter kit. 100pc kit covers 25 sq ft 350pc kit covers 100 sq ft 1050 pc kit covers 300 sq ft The PRO PLUG™ System makes plugging fast & easy, cutting installation time in half! For use in decking that is between 3/4" (19mm) and 1-1/4" (32mm) thickAvailable for Ipe, Cambara, Cumaru, Garapa, Jatoba, Massaranduba, Meranti, Merbau, Red Balau & TigerwoodThe PRO PLUG™ Tool creates a screw hole and countersink portion that is perfectly matched to the included wood plugs. They're the perfect fit! The PRO PLUG™ Glue Nozzle coats the sides of the hole, which is where the glue is needed for holding power. Little or no glue is deposited on the bottom of the hole where excess glue can create a hydraulic lock preventing plug insertion.PRO PLUG™ Plugs combine the best of flared and straight walled plug design. The unique chamfer design with reduced flare angle offers easy insertion and an extremely tight fit as the plug compresses around the top of the hole. It allows for complete insertion of the plug without sawing or chiseling.PRO PLUG™ Starter KitIncludes (1) Pro Plug Tool for Wood, (1) Pack of 5 replacement bits, (1) bottle of Titebond III Glue, (2) pieces of 5" orbital sand paper - 60 grit, (3) T20 star drive bits
$85.95 - $634.99
-
SD Connector Screw 316SS
The Strong-Drive SD Connector screw is designed for use in stainless steel connectors, replacing the need for nails. Load Rated Tested and approved for use with many Simpson Hangers and Connectors In certain applications, the load values achieved by the #9 SD Screw is greater than that of 10d common nails Specially designed screw shank pairs with holes in Simpson Connector Box includes the hex driver
$54.80 - $1,305.05
-
Pro Plug® Replacement Bits for PVC/Composite Tool
4 pack of replacement bits for the Pro Plug Tool for PVC. Choose between deck and trim bits replacements.
$5.00
-
Nylon Insert Hex Nuts, Stainless Steel
Type 18-8 and 316 Stainless Steel Hex nuts with a nylon insertSold by the pieceBuy 100 pieces or more and save!
$0.15 - $7.95
-
Cap-Tor xd Metal, Deck Screws for Metal Framing, #10 x 1-5/8", 410 Stainless Steel
Metal decking screws for steel joist deck framing systems. To find your perfect color match, use the Deck Matcher Tool. CAP-TOR XD Metal (formerly Deckfast® Metal) screws are versatile fasteners designed to attach PVC, composite, or capstock to steel and aluminum substructures. Screws are #10 x 1-5/8". To achieve a clean and uniform appearance, with screws set at a perfect and consistent depth below the surface, use the Smart Bit Depth Setter to install the screws. Triple-strength corrosion protection: 410 Stainless Steel + Zinc Plating + Epoxy Coating. Specially engineered head easily cuts through the hard outer layer of capstock decking products and also self-countersinks into IPE and other hardwoods, resulting in a clean, uniform appearance. #3 Drill point is designed to attach one-inch-thick decking to both 18- and 14-gauge steel joists, as well as two doubled-up 14-gauge joists. Color-matched options: These composite decking screws are blended to match popular deck board brands, making them essential deck fasteners. Self-countersinking head: Cuts cleanly through decking materials for a flush finish T20 Star Drive Ask us about the Buildex Teks Select version of this screw for Trex Elevations steel deck framing.
$168.25 - $1,340.15
-
Common Nails, Ring Shank, Stainless Steel
304 & 316 Stainless Steel Use for construction of decks, docks, planters or any outdoor wood construction Diamond point **Please note: Sizes 2-1/2" - 3-1/2" nails have a checkered head Recommended First Choice by the American Plywood Association, California Redwood Association, American Wood Preservers Bureau and Western Red Cedar Lumber Association Available in both AISI type 304 and 316 stainless steel Made in USA Annular Ring Thread: Use this shank style for maximum resistance to withdrawal in cross grain nailing. Annular ring shank nails are especially effective in preventing cupping and nail head popping in siding and decking installations. Not recommended for high shear, lateral or racking loads or end -grain nailing. AISI Grade 316 Stainless Steel has lower carbon content than 305 or 302HQ and contains molybdenum for superior corrosion resistance in salt water and other highly corrosive environments. It is the grade of stainless steel to be specified in any seaside application Stainless Steel Fasteners You Can Trust From stainless steel screws and nails to deck fasteners and joist hangers, Manasquan Fasteners supplies professional-grade hardware built to perform in any environment. As trusted fastener suppliers, we support builders with reliable products designed for long-term strength and durability.
$14.60 - $705.45
-
7/16" Crown "N" Series Staples, 16 Gauge, 1000pc Box, 316 Stainless Steel
Medium Crown Staples Similar to Senco "N" Series Similar to Senco "N" Series 7/16" Crown - 16 Gauge Wire Staple crown is measured as outside diameter Type 316 Stainless Steel- Salt Water Safe Approved for use inTreated Lumber
$35.25 - $56.80
-
Pro Plug System for Owens Corning Lumber, 50pcs
This Pro Plug System is designed for structural composite lumber. Enjoy the ease and beauty of hidden fastening, now available for Owens Corning Lumber. Install in 3 steps: Pre-drill Set the screw Insert the plug! Simple, effective, and code-compliant. The Pro Plug Structural Forstner Bit and Structural Smart-Bit Depth setter drill the screw hole counterbore to accommodate the screw and finishing plug. Note that plugs require boards at least 2 inches thick. Kits include plugs and screws; the tool and bit are required and sold separately. System Components: Carbon Steel F23 Structural Screws, 50pcs Owens Corning Lumber Plugs, 50pcs Smart-Bit Structural Depth Setting Tool - sold separately Pro Plug System Structural 22mm Forstner Bit - sold separately
$92.50 - $112.70
-
Smart-Bit Predrilling & Countersinking Tool
With Replaceable Powerbolic™ Drill Bits. Available in 5 sizes. Save with the Combo Kit. Pre-drill and countersink in one fast step with the new Smart- Bit® Smart-Bit® removes the guesswork from pre-drilling and countersinking Smart-Bit Quickly drills the perfectly countersunk hole in deck boards Drills a 1-1/8" deep hole (including countersink)sufficient for decking up to 5/4" nominal thickness Excellent for use in hardwoods and composite lumber, eliminating "mushrooming" around the screw head in composites
$24.45 - $69.99
-
Pro Plug System for Trex Enhance Decking, 375 Plugs
*Packs include 375 plugs only, no tool. PRO PLUG® for Trex® is a superior plugging system for Trex® decking & trim combining screw down strength with the beauty of a hidden fastener system Install in 2 easy steps 1. Set the Pro Plug screw with the PRO PLUG PVC Tool 2. Tap the Trex® plug in with a hammer. Plugs are cut from the original Trex deck boards for a perfect match Must use the Pro Plug screws for proper installation Customize your own Pro Plug® System for Trex® Decking Kit. The plug packs contain 375 plugs for 100 sq ft. Add your screws (375 piece packs) from the choices above or order just the plugs! Be sure to add on the PVC Tool above, it is needed for installation
$50.49
-
Fender Washer, Stainless Steel
Type 18-8 and 316 Stainless Steel Sold by the pieceBuy 100 pieces or more and save!
$0.08 - $1.33
-
Bugle Head Screws, #2 Square Drive, 305 Stainless Steel
Type 305 Stainless Steel - Wood Screws Type 17 notched point for fast penetration Self-countersinking bugle head Square drive recess reduces driver cam-out Threaded approximately 2/3 of shank on most sizes Deep coarse threads for better hold Important Installation Instructions: If the screws are to be driven by a screw gun, be sure the bit is securely seated in the square recess of the screw. Start slowly and gradually increase speed until the head is driven flush. A high driving speed increases the chance of stripping the square drive recess. If the tool has an adjustable torque collar, use a piece of scrap lumber to determine the proper setting needed to drive the head flush with the surface. This will prevent twisting off the screw head.
$103.10 - $482.00
-
Pro Plug System Structural Forstner Bit, 22mm
Replaceable bit for the Smart-Bit Structural tool. Paired with the stop collar, this tool pre-drills and countersinks structural screws. Use this bit for the installation of the Pro Plug System for structural composites and wood. Can be used with: Structural F19 Structural F23 Structural F23 Stainless Steel This bit is 22mm, approx, 7/8". Must be used with the stop collar, sold separately.
$27.95
-
Star Recess Driver Bits
U2 U-Bits™ Star Drive Bits Made to fit perfectly into U2 screws- snug fit allows for one-handed installation! Will fit any star drive screw U2 U-Bits are Color coded Sold in packages of 2 Perfect for use with an impact driver
$5.65 - $6.90
-
20-22° Plastic Strip Nails, 1000pc, 304 Stainless Steel
Full Round Head Ring shank 9/32" diameter full round checker patterned head Approved for use in ACQ Lumber Available in convenient 1,000 nail job packs Fits nailers designed for 20-22°, full round head, plastic collated nails Commonly Used Tools for Installation Bostitch: F21PL, F21PL2, LPF21PL, N79RH, N88FH, N88FH-2MCN, N90RHN, N95RHN, KN85PP-1, N95-162 Hitachi: NR83A, NR83A2, NR83A2(S), NR83AG, NR83AS, NR90AC, NR90AC2, NR90AC3, NR90AA2, NR90AE, NR90AEPR, NR90ALK, NR90GR, NR90GR2 Senco: SN60, SN65, SN65C, 502, 600FRH, 650FRH, 700XLFRH , FramePro 602, FramePro 650, FramePro 652, FramePro 702XP, FramePro 752XP, SN902XP
$77.00 - $184.20
-
Smart-Bit Structural Depth Setting Collar
The Smart-Bit Structural Depth Setting Collar for use with Smart-Bit Structural Forstner Bits. This tool is customizable. The collar is universal and fits 3 different sizes of Forstner bits. The Smart-Bit Structural Tool is designed for pre-dilling and countersinking structural screws in wood and structural composite lumber. Used for screw installations in framing lumber, pergolas, exposed beams, decks and more. The collar serves to protect the wood and prevent marring Compatible bits: 18mm Forstner Bit for the Starborn Structural F19 & Structural F23 stainless steel screws 20mm Forstner Bit for the Starborn Structural F23 screw (epoxy version) 22mm Forstner Bit for the Starborn Pro Plug System for Structural Composites and Wood Use Instructions: Align the Depth Setting Collar with the groove on the corresponding Forstner bit and tighten the set screw until the assembly is secure. Predill into the wood/composite material until the collar stops spinning. Remove any debris from the tool. Drive the screw until it is fully installed, being sure to not overdrive
$56.60
-
Wood Siding Nails, Stainless Steel
304 & 316 Stainless Steel Features an annular thread and diamond patterned head. Blunt diamond point and slender gauge minimize splitting Small head diameter allows face nailing or blind nailing (tongue & groove) Annular threads prevent cupping of siding & provide outstanding withdrawal resistance Generous under-head filet allows nail to be driven flush or countersunk Always use type 316 stainless steel siding nails in saltwater exposures Made in USA Siding nail length should be sufficient to penetrate a minimum of 1-1/2" into studs or studs & sheathing combined. AISI Grade 316 Stainless Steel has lower carbon content than 305 or 302HQ and contains molybdenum for superior corrosion resistance in salt water and other highly corrosive environments. It is the grade of stainless steel to be specified in any seaside application.
$14.35 - $435.75
-
Pro Plug System for Boral TruExterior Trim, 400 Plugs
Trim plugs for Boral Trim. Packs contain 400 plugs for 250 lin ft, tool and screws sold separately. PRO PLUG® for PVC is a superior plugging system for PVC decking & trim. It combines screw down strength with the beauty of a hidden fastener system Install in 2 easy steps...Set the screw with the PRO PLUG PVC Tool and tap in the PVC plug with a hammer. PRO PLUG® PVC Plugs are made from the original PVC material so they are a perfect match for your trim The PRO PLUG® PVC Tool drives fasteners to the correct depth every time. Its No Cam-Out Auto Stop™ prevents screw recess from stripping
$52.00
-
15° Coil Roofing Nails, 3600pc, Stainless Steel
Type 304 Stainless Steel 3/8" head diameter Ring Shank for superior holding power Type 304 Stainless Steel Commonly Used Tools for Installation Bostitch: BRN175, RN45, RN45B, RN46, RN46-1, N12, N12B, N12-40 Hitachi: NV45AB, NV45AB2, NV45AB2S, NV45AC, NV45AE Paslode: 3175/44RCU, 3175RCU, F-265C, P275C, CR175C Senco: SCN200R, SCN40R, RoofPro 450, RoofPro 455XP
$152.45 - $508.35
-
Manasquan™ Hardwood Ipe Plugs
3/8" diameter tapered, face grained plugs Uniform 3/8" length Chamfered end for easy insertion Install with wood glue recommended by decking manufacturer 350 plugs covers 100 square feet of decking Available in 3 convenient package sizes Made in USA
$13.99 - $135.07
-
Simpson LUS Single 2 x 8 Face Mount Joist Hanger - Stainless Steel
Made in the USA with Type 316 (low Carbon) Stainless Steel 316 stainless provides the highest salt water corrosion resistance of the 316 types. Appropriate for marine and seaside applications and in other severe conditions where corrosion is a concern Must be installed with specified stainless steel fasteners Patented double shear nailing distributes the load through 2 points on each joist for greater strength. The nails slant through the joist into the header, not only fastening the hanger but also helping to carry some of the load. The hanger design allows for the use of fewer fasteners for faster installation Install with specified stainless steel fasteners Full length 3” or 3-1/2” hand drive nails (or 2-1/2” collated connector nails) are always required for the patented double sheer (angled) nailing. Under some conditions alternative sized fasteners may be substituted but at a potentially significant load reduction. See nail substitution chart. LUS series hangers are not intended for welded applications Caution! - Do not bend or remove tabs or alter hanger in any way
$15.37
-
Deckwise Ipe Plugs 3/8" Diameter
3/8" diameter face grained smooth plug Tapered for easy insertion 350 plugs covers 100 square feet of decking Available in 3 convenient package sizes! Made in USA
$19.50 - $190.97
-
Trim Screws, Star Drive, Stainless Steel
305 & 316 Star Drive Type 17 point for fast penetration Self-countersinking trim head Dry lubricated with non-stick film Threaded approximately 2/3 of shank Available in AISI type 305 and 316 stainless steel
$110.35 - $492.15
-
Finishing Nails, Stainless Steel
Type 304 & 316 Stainless Steel Features: Smooth shank, brad head, diamond point Excellent for interior/exterior trim and cabinetry exposed to wet conditions Available in both AISI type 304 and 316 stainless steel exterior finish nails Made in USA AISI Grade 316 Stainless Steel has lower carbon content than 305 or 302HQ and contains molybdenum for superior corrosion resistance in salt water and other highly corrosive environments. This is the stainless steel grade to use in any seaside application.
$14.15 - $458.00
-
3/8" Lag Screws, Stainless Steel
Type 18-8 & 316 Stainless Steel Choose from 4 diameters Hard to find long lengths Length is measured from under head to tip of screw
$0.60 - $42.95
-
Fiber Cement Wafer Head Siding Screws for Wood Siding, 316 Stainless Steel
For Attaching Fiber Cement Siding through Furring Strips to Wood Studs Fasten fiber cement to stressed-skin panels or lap siding to wood .390" diameter wafer head with countersinking nibs #2 square drive - threaded full length Type 17 point with coarse threads Type 316 Stainless Steel for the ultimate in corrosion resistance Use 1-1/4" screws to attach fiber cement siding to Stress-Skin panels Use 1-5/8" & 2-1/4" screws to blind fasten fiber cement lap siding to wood studs AISI Grade 316 Stainless Steel has lower carbon content than 305 or 302HQ and contains molybdenum for superior corrosion resistance in salt water and other highly corrosive environments. It is the grade of stainless steel to be specified in any seaside application.
$56.60 - $272.00
-
Pro Plug System Hardwood Plugs, 100pc Box
100 piece plugs packs for the Pro Plug® System. Perfect for replacing a few lost plugs or for finishing up a job. Plugs are 5/16" (8.5mm) in diameter. Face Grain plugs to match wood perfectly These chamfered plugs are designed to install easily and fit snugly. They stay put over time. No more plugs that pop up after weathering! Light sanding is recommended Use with the Pro Plug Tool for Wood
$26.75
-
Pro Plug System for Royal Trim, 400 Plugs
Pro Plug® System Kit for Royal / Celect Trim. The plug packs contain 400 plugs for 250 lin ft. for PVC is a superior plugging system for PVC decking & trim. It combines screw down strength with the beauty of a hidden fastener system Install in 2 easy steps...Set the screw with the PRO PLUG PVC Tool and tap in the PVC plug with a hammer. PVC Plugs are made from the Versatex Trim board so they are a perfect match! The PVC Tool drives fasteners to the correct depth every time. Its No Cam-Out Auto Stop™ prevents screw recess from stripping
$52.00
-
Smart-Bit Tool for Fiber Cement
SMART-BIT® Fiber Cement Tool is designed to make pre-drilling and countersinking fiber cement easier & faster with clean and uniform results -Pre-drills and Countersinks in One Easy Step! Use with #10 flat head screws Free-Spinning Stop Collar The Smart-Bit stop collar spins free of the drill bit, preventing surface damage or marking. When the stop collar stops spinning, the hole is complete. NOTE! Do not use with a hammer drill. No-Mark Rubber Ring Even though the stop collar is free-spinning, Smart-Bit also adds a rubber O-ring to make sure it stops properly and without leaving any marks behind. Tungston Carbide Bits & Countersink The Tungston carbide tipped countersink and bits minimize wear and help maximize the life of the tool.Anti-Clog Debris CavityThe Smart-Bit debris cavity gathers waste material, keeping it clear of the countersink, unlike conventional flush mounted countersinks
$63.75
You have seen 48 out of 302 products
